Nitro Planes New! Twin EDF HA-420 Honda Jet
#28
Senior Member
Thread Starter
My Feedback: (30)
Join Date: Feb 2008
Location: Hayward ,
CA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts

Another Flight This Weeken With My Skycam View.
My First 2010 Flight For On The Twin 90mm HA-420 Honda Jet With The SkyCam Picture-N-Picture View. On This Flight, I Only Used Up 2200mAH Out The 3850mAH 6 Cell ThunderPower Lipo Pack.
[youtube]http://www.youtube.com/watch?v=6RzrCO8gvug[/youtube]
My First 2010 Flight For On The Twin 90mm HA-420 Honda Jet With The SkyCam Picture-N-Picture View. On This Flight, I Only Used Up 2200mAH Out The 3850mAH 6 Cell ThunderPower Lipo Pack.
[youtube]http://www.youtube.com/watch?v=6RzrCO8gvug[/youtube]
#29

My Feedback: (8)

I flew my Honda jet today this was the thrid flight and the stab broke about 1 to 2" out from the vertical fin. I cut power and still had minimal elevator but about 20 off the ground lost what was left of the elevator and it hit the ground at 45 degree angle and broke the fuse and right wing to the point it is not repairable. I would recomend sheeting the stab to strenghen it up. I had RClander fan shrouds with Tam Jet rotors Typhoon 600-43 motors producing 2050 KW on 8s batteries. fan set up was great. To bad the stabe broke in flight.[&o]
#30

My Feedback: (21)

Hey FlyBoy,
I was wondering about the kind of ESC's that you used in your HondaJet. I have not yet done a twin ducted fan model yet and this model is really nice, i was thinking i will just follow along and duplicate your setup, would you have pictures to share of the inside of the fuselage so we can see how you have the battery arrangement setup.
Thanks.
Louis
I was wondering about the kind of ESC's that you used in your HondaJet. I have not yet done a twin ducted fan model yet and this model is really nice, i was thinking i will just follow along and duplicate your setup, would you have pictures to share of the inside of the fuselage so we can see how you have the battery arrangement setup.
Thanks.
Louis
#31
Senior Member
Thread Starter
My Feedback: (30)
Join Date: Feb 2008
Location: Hayward ,
CA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts

I Have A Detailed Build On This Link Here Where Others Have Also Shown There's Also Feel Free To Asking Questions On The Build Thread 
Here's The Link;
http://www.rcgroups.com/forums/showt...90mm+honda+jet

Here's The Link;
http://www.rcgroups.com/forums/showt...90mm+honda+jet
#33
Junior Member
Join Date: Jun 2006
Location: Clearwater, FL
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts

Flyboy,
I just pulled my honda 420 prop version out teh the clost after two yrs, got a bit sidetracked with family. anyhow i have everything i need, except for the batteries, I am using two GP SS 60amp ESC's, and a Spektrum AR7600 receiver, i was going to use two 4s/5s-4500 for the motors, how do I configure the Dual ESC's for the receiver. Also I should think i would not need a seperate battery for the servero's receiver correct ? All help would be greatly appreciated..
rrraptor
I just pulled my honda 420 prop version out teh the clost after two yrs, got a bit sidetracked with family. anyhow i have everything i need, except for the batteries, I am using two GP SS 60amp ESC's, and a Spektrum AR7600 receiver, i was going to use two 4s/5s-4500 for the motors, how do I configure the Dual ESC's for the receiver. Also I should think i would not need a seperate battery for the servero's receiver correct ? All help would be greatly appreciated..
rrraptor
#36
Junior Member