DYNAM GRAND CRUISER LIGHTING SYSTEM
MY DYNAM GRAND CRUISER ARRIVED IN FINE SHAPE. THERE ARE NO INSTRUCTIONS FOR THE LIGHTING SYSTEM,
AND NO CONNECTORS FOR THE TINY WIRES. WHAT TYPE OF CONNECTOR GOES ON THOSE TINY WIRES, AND DO THE LIGHTING WIRES GO INTO A CONTROLLER WHICH THEN PLUGS INTO THE RX? IF SO WHICH CH? NEED HELP, LNL |
RE: DYNAM GRAND CRUISER LIGHTING SYSTEM
How you do it, is up to you.
You have several options. You can hook the wires up to a 9v pack using a standard battery adapter/clip. You can also hook the wires up to a servo connector and power them by hooking it into an extra channel on the RX. However you'll get a dimmer light if you do the latter. I've tested the LED's out to 9v, but they may also take higher voltage. |
RE: DYNAM GRAND CRUISER LIGHTING SYSTEM
Don''t worry, be happy and fly something! ....but do not expect NitroPlanes to replace anything !
|
RE: DYNAM GRAND CRUISER LIGHTING SYSTEM
ORIGINAL: opjose How you do it, is up to you. You have several options. You can hook the wires up to a 9v pack using a standard battery adapter/clip. You can also hook the wires up to a servo connector and power them by hooking it into an extra channel on the RX. However you'll get a dimmer light if you do the latter. I've tested the LED's out to 9v, but they may also take higher voltage. |
I just got my G.C., got the RTF version, came with everything including the connectors and a gyro.
Looking for foam paint so I can do her up in the TV show SKY KING. |
All times are GMT -8. The time now is 11:09 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.