rc10gt2guy7

ok i have an rc10gt2 and i got it tuned buy the lhs the other dayafter break in i just got it 3 days ago and now today the motor will die after a couple min. the motor is really hot its smoking on the header i am new tooo nitro and all i want is to now how do i fix these ,i used the water trick i put a little water on the header and it boiled away ,please help

TeamCELRacing

dont check it by the header check it buy the head but fatten the high speed needle up about a quarter turn

rc10gt2guy7

turn the high speed needle up thene

Baja5BLST

of course the water boiled away, the engine is running at about 240, which is hotter than water's boiling point. Just get a temp gun, and make sure the temps aren't above 250

sfar785

Or post this in the Stadium Truck forums....this will get more attention there.

Ron Olson

My Feedback: (1)

If that engine has the plastic insert in the carb, take it out then richen the needle just a little more then that puppy will really wake up!