65in. Yak set up
#1
Junior Member
Thread Starter
Join Date: Aug 2004
Location: Ocala,
FL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
65in. Yak set up
I am getting ready to start my 65in. Yak. Just got a new Saito 1.25 for on it and four of the JR sport 125MG servos. Anyone with this set up yet and give me some opinions ie: prop sizes etc.
#2
My Feedback: (3)
Join Date: May 2002
Location: Beavercreek, OH,
Posts: 4,319
Likes: 0
Received 0 Likes
on
0 Posts
RE: 65in. Yak set up
Bill, setup should be the same regardless of servos. Sounds like you have a great combination with that engine and servos! Plenty of power all the way around. Set your throws maxed out with ailerons and about 45 degrees or more elevators, as much rudder as you can get. Low rates and expo is a personal thigh for each pilot so you'll have to decide on that. You might want to do a search for the 125 engine to see what props folks are running. I'd guess APC 17-4 would be the ticket.
#5
Junior Member
Thread Starter
Join Date: Aug 2004
Location: Ocala,
FL
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
RE: 65in. Yak set up
ORIGINAL: buenger_2000
I asked a few days ago with no reply. Does anybody know if the 65" yak arf is still available?
I asked a few days ago with no reply. Does anybody know if the 65" yak arf is still available?
#6
My Feedback: (3)
Join Date: May 2002
Location: Beavercreek, OH,
Posts: 4,319
Likes: 0
Received 0 Likes
on
0 Posts
RE: 65in. Yak set up
Yes but it clearly says out of stock and has for a little while now. Sorry but the 65 yak ARFs are sold out. We do have many scratch and dent parts though and can offer partial kit/arf combos. We plan to get that advertised on the website probably after toledo. If interested though please give John a call.