CYCLONEMAN55

Does anyone know if a Saito 100 will fly the 67" Fusion with enough punch for some 3D stuff. I have the Saito 100 on an 8 lb, 65" U Can Do now and it does OK. I run a 16x4w prop and get 9500 RPM. The plane has decent verticle.
Lee Mitchell

daveopam

My Feedback: (9)

Lee, I have a 1.25 on mine. It is way overpowered. Hover is less than 50% throttle on the average day. Your AUW should be less than your UCD. So if it's enough for the UCD it should be OK in the Fusion.

David

rcplanenut

My Feedback: (12)

I ran a Saito 100 on my Fusion. It was a little under powered for 3D. I took the Saito off and put a OS120AX on and it became a excellent plane for 3D and pattern type flying. If you want a 4-stroke then try the Saito125 or a YS110.