RCU Forums - Kat 40 Low Rates

RCU Forums (https://www.rcuniverse.com/forum/)

- OMP - Ohio Model Products Support Forum (https://www.rcuniverse.com/forum/omp-ohio-model-products-support-forum-261/)

- - Kat 40 Low Rates (https://www.rcuniverse.com/forum/omp-ohio-model-products-support-forum-261/2508061-kat-40-low-rates.html)

Basement Troll

01-06-2005 08:31 AM

Kat 40 Low Rates

Gentlemen, what would be some reasonable low rates for the control surfaces on the Katana 40?
Also do you guys use exponential on these planes? This is my first rofile.
Don

AFSalmon

01-06-2005 08:37 AM

RE: Kat 40 Low Rates

rates and expo are always a personal thing. Most experienced profilers don't even use low rates anymore. Sure we program in the switch but we never use it! A good rule of thumb is to use 60% for low rates and about 40 - 60 percent for expo depending on your preference. Some folks don't use any expo and others use a lot. It's really a personal thing.

Basement Troll

01-06-2005 08:41 AM

RE: Kat 40 Low Rates

Thanks Mike! I will use that as a starting point.
Don

All times are GMT -8. The time now is 11:51 AM.