RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Pattern Universe - RC Pattern Flying (https://www.rcuniverse.com/forum/pattern-universe-rc-pattern-flying-514/)
-   -   Any new .45 size pattern planes? (https://www.rcuniverse.com/forum/pattern-universe-rc-pattern-flying-514/11661613-any-new-45-size-pattern-planes.html)

edintheclouds 03-04-2019 07:06 PM

Any new .45 size pattern planes?
 
I'm scouring the interwebs for a patter plane the would be good for my Rossi .46 to no avail. are there no kits out there ? If nothing else, I'm thinking about the Stinger.

BelAirBob 03-05-2019 06:11 AM

They were discontinued a year or two ago, but there should be a number of UltraSport 40ís out there. I bet most bought were never built and still in the box. I bought a few US 60ís for future builds. Wish I would have bought a US 40 too

Good luck

flywilly 03-05-2019 07:46 AM

I have some kits you might be interested in. My email is: [email protected]
Send me an email and I'll send you what I have and If your are interested I can email you photos of the kit or kits.
Regards,
Will

xcead 03-06-2019 07:49 AM

Mine, I have CAD plans If you want. In about 1 month will be maiden flight. Then I tell you how it flyes.
Its 1.5 x 1.5 mts. 46 engine

https://cimg7.ibsrv.net/gimg/www.rcu...b7a9c290b1.png

edintheclouds 03-06-2019 05:39 PM

Dang! That looks nice xcead.

redwingsfan71 03-08-2019 12:04 AM

45 Size Pattern Designs
 

Originally Posted by edintheclouds (Post 12507733)
I'm scouring the interwebs for a patter plane the would be good for my Rossi .46 to no avail. are there no kits out there ? If nothing else, I'm thinking about the Stinger.

Iím currently prepping the Gus Ozolís Salient Designs (spelling?) Boxer series of pattern planes from the 90ís for foam core wing/balsa ply fuse construction. .45 / .60 / .90 / 1.20 sizes... The .90 and 1.20 are 4-stroke powered.

xcead 06-10-2019 06:57 AM

https://cimg1.ibsrv.net/gimg/www.rcu...c1cb1a1aca.png
Ready to fly!
Later this week I tell you news
Regards

CXXXV 08-20-2019 06:34 AM

There a number of 40 sized ARF pattern planes available. I have a Vanquish 48 from Extreme RC

Hawkeye 05-02-2020 02:06 PM


Originally Posted by xcead (Post 12508159)
Mine, I have CAD plans If you want. In about 1 month will be maiden flight. Then I tell you how it flyes.
Its 1.5 x 1.5 mts. 46 engine

https://cimg7.ibsrv.net/gimg/www.rcu...b7a9c290b1.png

Have you finished this? Let us know how it flies. I could be interested in building one.
...Steve

xcead 05-05-2020 09:28 AM


Originally Posted by Hawkeye (Post 12601513)
Have you finished this? Let us know how it flies. I could be interested in building one.
...Steve

No I haven't yet. too much work for me.
As soon as I have news, I can tell you how it flies

Regards

highfly3D 07-31-2020 08:17 AM

I am in the process of designing a 40 size pattern plane, I am having a super tiger 51 ring engine in the box.. I a planning to use that engine for this plane.. The length 57 inches & wingspan would be 55 inches.. I am working on the design of the wing.. and the fuselage outline. Once that is done will start the construction of the prototype

perttime 08-02-2020 07:26 PM


Originally Posted by highfly3D (Post 12621436)
I am in the process of designing a 40 size pattern plane, I am having a super tiger 51 ring engine in the box.. I a planning to use that engine for this plane.. The length 57 inches & wingspan would be 55 inches.. I am working on the design of the wing.. and the fuselage outline. Once that is done will start the construction of the prototype

Any outline drawings that you can share, yet?

CXXXV 08-12-2020 06:17 AM

I am using the plans for an Insight and scaling it down about 20% (50" wing span). Not all dimensions need to be reduced however. Reduced fuse length by 1". Increased vertical stab height.


All times are GMT -8. The time now is 11:13 PM.


Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.