RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/index.php)
-   Marketplace (https://www.rcuniverse.com/forum/forumdisplay.php?f=560)
-   -   Tbm dv8r (https://www.rcuniverse.com/forum/showthread.php?t=11701930)

RCAdam03 09-07-2022 12:19 PM

Tbm dv8r
 
hi all. I hate to do this, and anyone who knows me will be surprised, but I have to sell my DV8R. Sadly my transportation and storage capabilities have changed, so I'm having to downsize the fleet. I haven't flown this since i bought it. I shall list the good and what you need to do to complete it below, as well as the specifications. PLEASE READ THE FULL AD

83" wingspan
82" length
42" horizontal stab width
22-28lbs AUW

The good:
Included is an older Jet Central Falcon 100 turbine, do not know the total time
Pro Link retracts and struts, Intairco wheels and brakes.
All Power HD servos for the control surfaces except for the elevators, those are JR 8611s
Dreamworks digital air pressure gauge for retract and brake systems
Smart Fly battery regulator for dual 2S Lipo RX packs

needed to complete:
covering is doing that classic Ultracote thing, it's not great. lots of places I've had to re attach with the iron, the plastic is separating from the colour, seams are hard to keep stuck. seen may people recover these or glass and paint. there are some scrapes on the elevators and wingtips from rough pavement landings.

I do not have the HDT for the turbine, it didn't come with one when i bought it.
You will need an ECU cable extension, you can get it from AeroPanda.
need to finish the brake system plumbing.
Add 10channel RX and batteries.
Remainder of the fuel lines and propane lines
I may have forgot a couple other little things you need to do.

Asking $2000, OBO. I will not ship this, pickup in central NC, I will drive to meet you within reasonable distance.

I may, MAY, consider a trade or trade plus cash deal, very much depending on what you have. Would really like something made for Glow Ducted Fan, old version JMP T33 airframe, JMP Starfires, any version, CJM ducted fan models, BVM old Ducted fan jets, Sportshark, Mav, Viper, Aggressor, etc. Tom Cook F4 with removable wings. All in decent condition, or kit form. all made for ducted fan.
Please message me if you more questions or want more photos. Thanks


All times are GMT -8. The time now is 07:39 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.