Need a Profile, 20cc gas
#1
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Folks, I've been looking for an ARF or kit for a 20cc (1.20 cubic inch) profile airplane, with no luck. Can anyone share where I can buy such an airplane? I have a DLE-20RA engine that I'd like to get back in the air. Any help would be appreciated. I guess just a set of planes could be used to make my own kit, but would prefer an ARF.
Thanks,
Larry
Thanks,
Larry
#2

My Feedback: (9)

You can get Mojo 65 plans here. https://aerofred.com/index.php?sessi...o3fglt5cvvm354
Not sure what I'll do if I ever loose my 67" Fusion. It's a shame our hobby is going away from these.
David
Not sure what I'll do if I ever loose my 67" Fusion. It's a shame our hobby is going away from these.
David
#4

My Feedback: (9)

If I understand it correctly you will need to register with the site and sign in. There may also be some good info on the profile brotherhood site.
I should have the plans someplace for the original OMP Fusion. Back then they made a kit and ARF version. Duplicating the ply fuse parts might be a chore unless you are good with a scroll saw.
David
I should have the plans someplace for the original OMP Fusion. Back then they made a kit and ARF version. Duplicating the ply fuse parts might be a chore unless you are good with a scroll saw.
David
#5
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

David, I registered on the website, but once logged in, I can't find the Mojo-65 plans. I can find them before logging in, but not after. Not sure what is going on, but then I'm a bit analog and not digital.
#7
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Seven year old--good call. I understand there are a couple chinese vendors that may be making them. That according to a flying friend that has an older YAK made from an Wrongway RC kit.
#9
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Well, it didn't work out, at least not yet. The company is a manufacture, and would be happy to build us 200+ airplanes, but not two. Still looking.
#10

My Feedback: (125)

PDF file of the Mojo65 plan attached below. If you'd like them printed, shoot me a PM.
https://www.rcuniverse.com/forum/market/11684770
Dennis
The following users liked this post:
daveopam (11-17-2020)
#11
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Hemikiller, Thanks for the pdf! I can get it printed here. Thanks for taking the time to post and respond. Paul's plans are very nice if building his kit, but lacking info for the "plans builder" as there is only one wing rib profile, and no idea what the profile is so you could use a wing profile program to get the different size ribs for the tapered wing. I'll have to noddle this a bit longer. Thanks again for you help.
Larry
Larry
#13
Junior Member
Thread Starter
Join Date: Oct 2020
Location: West Richland, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Mr. Hicks, I should have said wing ribs have a different chord, as the MOJO 65 has a tapered wing. I don't know the profile, do you? If I knew the profile, I could use Compufoil to generate the various ribs by inputting each ribs chord.
Larry
Larry
#16

My Feedback: (125)

Hemikiller, Thanks for the pdf! I can get it printed here. Thanks for taking the time to post and respond. Paul's plans are very nice if building his kit, but lacking info for the "plans builder" as there is only one wing rib profile, and no idea what the profile is so you could use a wing profile program to get the different size ribs for the tapered wing. I'll have to noddle this a bit longer. Thanks again for you help.
Larry
Larry
Here's the parts pages in PDF, found the on the Profile Brotherhood forums.