morris Pull-Pull ?
 

Hey guys, need some help here. I've never had to use pull-pull cables before. I'm making progress on my Sledge and just the hardware package from morris. Can someome explain to me how I make the pull pull wire secure without it being able to slip and create slop? Pics would be nice too. Thanks

Jason

RE: morris Pull-Pull ?
 

Here's my servo end

http://www.pan-tex.net/usr/w/jwillia...ledgeWheel.jpg

I can't find the pic of the tail end. right off...

RE: morris Pull-Pull ?
 

On the tail end I used the 2-56 rigging couplers and metal clevises that came with the kit. The rigging coupler is a piece of 2-56 thread with a hole drilled thru it. I think my Sledge had the rigging couplers, clevises, cables, and cable crimps all in it.

I can get a pic up when I get home if you still need it.

RE: morris Pull-Pull ?
 

all right I got it. What else can be used as a cable crimp. The ones I have are too small and only allow the the cable to go through one time. I can't get the wire to cram back in to crimp it shut.

Jason

RE: morris Pull-Pull ?
 

your just not hold your mouth right!

B Bill

RE: morris Pull-Pull ?
 

try useing small peices of brass or alum tubeing for makeing the crimps....G

RE: morris Pull-Pull ?
 

Alright, I'll see what I can come up with. Thanks for the help.

Jason

RE: morris Pull-Pull ?
 

I use Berkley fishing line crimps. They come in different sizes.

RE: morris Pull-Pull ?
 

Got all the linkages done. I had some left over brass tubing from another project that worked perfectly for crimps. All that's left to do now is put the motor on and HANG on.

Jason

RE: morris Pull-Pull ?
 

Good job, where is the pic.

B Bill

RE: morris Pull-Pull ?
 

I'll put one up once everything is completed.

Jason