JR Reciever help
#1
Thread Starter
Join Date: Dec 2005
Location: Bloomingdale, NJ
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
JR Reciever help
I was just given a full JR 6102 setup. I am a Futaba person and have a question on which way the plugs go in. On the Futaba the plugs only go in one way, but the JR they can go in either way. What I would like to know is what color wire goes to the top of the reciever?
Thanks
John
#3
Thread Starter
Join Date: Dec 2005
Location: Bloomingdale, NJ
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
RE: JR Reciever help
Thanks,
The plugs slide easily either way, that is why I was asking. Maybe I will have the RX checked out, now knowing that they should only fit one way.
Again thanks for the help.
The plugs slide easily either way, that is why I was asking. Maybe I will have the RX checked out, now knowing that they should only fit one way.
Again thanks for the help.
#5
Senior Member
My Feedback: (4)
RE: JR Reciever help
I recently faced that dilemma too. I always used Futaba, but I bought a few JR radios for when I review stuff from Horizon (I kinda hated using their competitor's radio in their stuff)
Anyway, both radios use RED as the middle wire. Just remember that Jr's dark brown = Futaba's Black (Both dark colors) and Jr's Yellow = Futaba's white (Light colors)
Anyway, both radios use RED as the middle wire. Just remember that Jr's dark brown = Futaba's Black (Both dark colors) and Jr's Yellow = Futaba's white (Light colors)