RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Questions and Answers (https://www.rcuniverse.com/forum/questions-answers-154/)
-   -   Using Oratex (https://www.rcuniverse.com/forum/questions-answers-154/11705602-using-oratex.html)

FlyerInOKC 03-06-2023 08:38 AM

Using Oratex
 
Does Oratex require a covering adhesive (Stix it, Cover Grip, etc.) like Solartex did or will it iron on to balsa without any sticking issues?

jaka54 03-07-2023 02:39 AM

Neither Solartex or Orataex or any other plastic covering film need adhesive! Just iron it down!
https://cimg8.ibsrv.net/gimg/www.rcu...93d4a12337.jpg
https://cimg8.ibsrv.net/gimg/www.rcu...7e85a84807.jpg
https://cimg2.ibsrv.net/gimg/www.rcu...f38c4d99d9.jpg
Marutaka DC-3

FlyerInOKC 03-07-2023 05:14 AM

Beautiful planes!

speedracerntrixie 03-07-2023 06:22 PM

This is my first experience with Oratex. I applied it as is off the roll. It stuck very well to both the bare wood stringers and the glassed sheeted areas. This is what they call white, it’s quite transparent which is not an issue as I intend to prime and paint. I’ve done a couple test samples to determine paint coverage and the amount of weave visible without primer.

https://cimg4.ibsrv.net/gimg/www.rcu...10b0af7d5.jpeg
https://cimg5.ibsrv.net/gimg/www.rcu...c5c0a1749.jpeg

FlyerInOKC 03-07-2023 08:21 PM

The airplane looks familiar what is it?

speedracerntrixie 03-08-2023 04:56 AM

Pilot OK models 1/3.5 Pitts Special. Will be done up in Art Scholl colors. Wings are already done in Monokote. I’ve been waiting for dry weather to paint the fuselage.

https://cimg2.ibsrv.net/gimg/www.rcu...03740dfca.jpeg
https://cimg3.ibsrv.net/gimg/www.rcu...632b6904c.jpeg

FlyerInOKC 03-08-2023 05:31 AM

I'll bet she will fly as good as she looks!

speedracerntrixie 03-08-2023 06:39 AM

Thanks, I certainly hope so. It originally belonged to a club member that passed. I was told it was his favorite airplane. I have a habit of picking up these projects under these circumstances. I feel it’s a good way to honor our lost members.

FlyerInOKC 03-08-2023 07:14 AM

I have a couple of unfinished projects that came from similar sources. It's rather depressing to think about. One was a first project, owner was up there in years), and he decided he didn't/couldn't finish it and sold everything to a guy I know. He It was a Top Flite Corsair with 4 servos and the retracts in it. He tried for 2 years to sell it and couldn't. I swapped a Goldberg Cub kit and Super Tigre .40 for it, he sold them in a week. I have a Goldberg Tiger 2 and a House of Balsa AT-6 partially built I saved from the trash heap, the owner went into a nursing home, dementia, and didn't last long.


All times are GMT -8. The time now is 02:15 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.