|
pull pull system
can someone post a picture of how the wire is secured to the control horn?
|
RE: pull pull system
Usually the wire is secured to a threaded portion which mounts to a clevis, which is attached to the control horn, to allow for some adjustment. That is the method I have used for a pull pull setup, you could just loop your wire through the horn and secure with a brass or other short length of metal tube that is crimped to hold the wire, but I would not do it like that.
|
RE: pull pull system
|
RE: pull pull system
1 Attachment(s)
Here ya go ...
There is a crimp sleeve under the shrink wrap ... |
RE: pull pull system
What do you use to crimp the sleeve? In other words, what tool works best to make sure that wire won't slip free?
|
RE: pull pull system
When you are doing pull - pull don't forget about the Ackermen. http://members.cox.net/bdfelice/Ackerman/ackerman.htm
Here is some links to pull - pull: http://www.geocities.com/roger_forgues/PullPull.html http://www.mindspring.com/~rellis2/rcpattrn/ppull.htm http://www.modelairplanenews.com/ME2...1F8759CD2BE46F |
RE: pull pull system
ORIGINAL: RPool What do you use to crimp the sleeve? In other words, what tool works best to make sure that wire won't slip free? |
| All times are GMT -8. The time now is 12:53 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.