Engine Break In Stand
 

Hello,

I am wondering what is the best way to go about building a engine test/break-in stand. Can anyone post up some pictures or plans on how to build one???

Thanks

Jason

RE: Engine Break In Stand
 

HI Jason;

For engines alone... I don't know.... BUT if the engine is in an Airplane!

I swear by the Meroke Airplane Start up benches. They are primarily used at your field to assemble your plane and start or tune an engine. But there is nothing to say that you cannot build one for your own use at home! ;)

Here's the link;
http://www.meroke.com/sbbuildinginstructions.htm

Good Luck!

RE: Engine Break In Stand
 

[quote]ORIGINAL: Blitzz

Hello,

I am wondering what is the best way to go about building a engine test/break-in stand. Can anyone post up some pictures or plans on how to build one???

Thanks

Jason

If you don't mind spending a little extra try one of these. http://www.pspmfg.com/ModelAirplaneE...estStands.html

RE: Engine Break In Stand
 

Hey Guys thanks for the replys. I am not really interested in buying one becuase I have everytool and kind of wood to build it I am just wondering on what type to build. I know there is many different ones. I need to save money for my new spektrum radio system and plane after that...haha. Plus I want a project for the school break!!!

Jason

RE: Engine Break In Stand
 

A couple of ideas. My brother built the one with a nylon engine mount and an old servo to hold the throttle in place.

RE: Engine Break In Stand
 

Whatever you decide to do at least make it portable and capable of accepting a wide range of engines.

Pictures are an example, from .049 to 1.2 FS.

ED S

RE: Engine Break In Stand
 

It all depends how complicated you want to go, This one comes from a school science fair project. It gives both thrust and RPM.

More pictures here : http://www.rcuniverse.com/forum/fb.asp?m=7035063

Steven

RE: Engine Break In Stand
 

I also use a setup similar to ed smith.a large tatone adjustable engine stand mounted on a portable bench.

RE: Engine Break In Stand
 

Here is mine:

Test Stand

RE: Engine Break In Stand
 

Alright thanks for the replys!! I have one built and I will try and get some pictures up later. I have 2 tanks through my OS 55AX.

Jason

RE: Engine Break In Stand
 

Here is mine, basically a Dub Jett stand with a metal base to it. The reciever in the front takes an adapter for larger engines.

RE: Engine Break In Stand
 

Dang, looks like you could test a P&W R-985 on that stand there YUKONFLYR!! [X(]

That's some serious test stand you have. I like it!

RE: Engine Break In Stand
 

Yukonflyr,now that is a test stand,when I first saw it I thought that if the sq.tube was replaced with a rd.tube you could use it as a post hole digger.I should have kept my roach holder from the 70s. pub