Help in indentifying plane
 

I am based in Phnom Penh and bought a static display in the local toy shop. They have lost the box, manual etc. Can anypone please help me identify this plane, engine size, make? It is not a Seagull made plane as I have contacted them and they have confirmed that it is not one of theirs. Thanks.

RE: Help in indentifying plane
 

It looks like one of the Phoenix Models planes or maybe a copy of one.

RE: Help in indentifying plane
 

That's what I was thinking. It looks a lot like a Phoenix Extra 300S I have in a different color scheme. Mine's got a Tower Pro .46 on it with a Pitts style muffler (never again on the Pitts, bought the whole plane setup used).

http://www.gravesrc.com/PHOENIX_MODE...p/pmma0540.htm

RE: Help in indentifying plane
 

I was thinking more like a Seabee or something similar http://www3.towerhobbies.com/cgi-bin...?&I=LXGTS5&P=0

RE: Help in indentifying plane
 

Maybe a Sportsman Excelleron 40?

RE: Help in indentifying plane
 

Gents - Thank you for your kind response. It does look more like the Phoenix Sea Bee, perhaps an earlier version?

RE: Help in indentifying plane
 

They used to have some other patterb-type planes in addition to the Seabee. I know they also sell some stuff in other countries that they don't here in the US so who knows.

RE: Help in indentifying plane
 

http://www3.towerhobbies.com/cgi-bin...?&I=LXPGS4&P=7

Fuselage is a dead ringer for the Laser, which is discontinued. The pilot figure is Phoenix Models too. Two strips of blue/red on the trailing edge of the wing is missing, but it is in fact none other than a Laser 40.

RE: Help in indentifying plane
 

I compared them with the references. It looks lpike a combinationof a Sea Bee and the Laser 40. The cowl in my model is identical to the Sea Bee.