Tekno EB48 2.0 Complete Video Build Guide!
#1
Tekno EB48 2.0 Complete Video Build Guide!
Having built my first kit - the Tekno EB48 2.0 - I decided to share my experiences and create a complete video series covering the entire build.
The aim of this video series is to help complete beginners, as well as those more experienced, build the EB48 2.0 from its kit form, to a complete rolling chassis! In fact, you won't even need the Tekno manual by following this video guide!
Other Tekno kits follow a similar pattern, so the videos could help with any Tekno Kit you are looking to build!
NOTE : I am not affiliated with Tekno in any way. All views expressed in these videos are my own.
If you like the videos, please do consider subscribing to my channel - it really does help me out - and you'll be informed when the next video is released too!!
So, on with our first video - an overview of the kit, and what you need to get started!
The aim of this video series is to help complete beginners, as well as those more experienced, build the EB48 2.0 from its kit form, to a complete rolling chassis! In fact, you won't even need the Tekno manual by following this video guide!
Other Tekno kits follow a similar pattern, so the videos could help with any Tekno Kit you are looking to build!
NOTE : I am not affiliated with Tekno in any way. All views expressed in these videos are my own.
If you like the videos, please do consider subscribing to my channel - it really does help me out - and you'll be informed when the next video is released too!!
So, on with our first video - an overview of the kit, and what you need to get started!
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
The following users liked this post:
quinton_9 (01-08-2021)
#14
Very good videos. I especially like how the shock collars mysteriously went on without any use of cuss words. Just kidding. I was all over the interwebs and there were a bunch of guys that just got their kits, and complaining about the shock collars being a pain to thread on. One guy even cross threaded them. I was kind of glad everyone was fessing up (admitting) they had troubles, because I knew I couldn't be the only one out there with sore fingers during the shock build.
#15
Honestly - I didn't have too much trouble with them. I applied a little grease, as demonstrated in the video, and I then used the Tekno Wheel Wrench to help get the collar on, but once threaded on I didn't actually find it too difficult to get the collar further up to where I wanted.......maybe I just got lucky! lol
#21
If you're into 1/10 scale here's a new build of the Tekno EB410.2!
Tekno EB410.2 Complete Video Build Guide!
Tekno EB410.2 Complete Video Build Guide!