engine help
 

what is the fastest/cheapest motor out there,,,,,

RE: engine help
 

The fastest Cheapest Mill, only if there were such a thing we would all have one.

The cheapest mill with any speed I would say Hyper 21 8 Port from ebay at 69.99 buy now.

Mike

RE: engine help
 

No 10 Elastic :D:D:D

RE: engine help
 

Okay.... how many times does this guy post about stuff you can use the [:-]search[X(] button on I've just read like 10 threads hes posted that seemed to have already died out.

RE: engine help
 

look at the CMD MAC .21 , its as fast as pretty much any other motor out there in most respects. I just ran one in yesterday and it kept up with a JP B5 mod on the straights, it lacks a little on the bottom but i havent even tried a proper clutch setup yet and i never found myself needing more power to keep up with other buggies. I was VERY impressed seeing as it costs $159 with a spare crankshaft(crankshafts usually cost around $70). I own a v-spec as well and I can barely see a difference if any. It used to cost $330 but its on a clearance sale at the moment so basicly you get a top of the range racing mill for the price of something like an O.S RG or Hyper 8 port. If ur down on ur budget you must look at it because there is nothing better for that price. Go to www.cmdracing.com and call or email them to buy.

RE: engine help
 

ALDEN is correct in that the MAC is a great engine with lots of power - no doubt about it! A couple of guys have them where I run and they are great engines. I have seen it keep up with a modded RB no problem!

If your budget can't afford the MAC and you don't want to wait until you can afford it - take a look at the OS RG -- that thing can scream!

RE: engine help
 

If you want an engine that kicks , a sh.21 6 port. Hobby People sell them for $229 , but Dinbal has an Ebay store and sells them for $169. I`ve raced against RBs , v-specs ,ofna .21 race , o.s , and some others. The SH has great all around power , every track I`ve been to everyone comes to my pit and wants to see what I`m running. You won`t go wrong with it.

RE: engine help
 

I got my mach .26 for only $120 brand new at my lhs. It have 7 port, turbo crankshalf and
2.75 hp at 30,ooorpm. I used it on my hyper 7 tq sport. Also I got a sportwerks .26 with pullstart for my raptor prp at hobby town. Both engine don't have problem and it is on the 8th tank now running at 220F, 1st to 6th tank is for break-in temp 180-190F.

RE: engine help
 

This has to be the cheapest price engine! I was thinking of getting it! what the heck, ii cost less the a connecting rob for my 421B:D
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT

RE: engine help
 

I personally like the GS .21, Its Great on gas and it holds a great tune right from the break in process, and starts and runs Awesome. $130.00 brand new from gs racing. I dont know where to get it cheaper, because I have the same one that came with the Storm RTR, Its also a pretty tough engine come to think about it, because my freinds that I run with in a parking lot, ( size of a football feild) do laps around it, lots of laps[&:] and it takes those high rpm's for about 2 hrs. with of course a break in between 3 to 4 tanks of gas but I would say its usally the last one running out there and the first to start. And the engines that I'm racing against are HPI .15 Wasp .18 Os .18 I probably have about 15 gal. ran through it ( SIDEWINDER 20%) and it still runs like its just brokin in, and yes I have changed my clutch shoes.[&:]