xtm xt2 help
 

Hi, I have a xtm x-terminator 2 buggy its a really good buggy but it has made a loud clicking noise from where the clutch bell and the gear meets. I took the engine out and span the clutch bell and the gear seperate and theres no noise but when they are together they still make the noise. why?. And is they anything to do to stop the noise. PLEASE HELP ME Thanks

RE: xtm xt2 help
 

It is the clutch bearings,they go through a lot of stress,you did not say how much you ran the truck but clutch bearings will last about
1 or 2 gallons of fuel.

RE: xtm xt2 help
 

well thanks for the advice for a start. i have used about a litre of fuel but i dont know how much a gallon is so i dont know if i have used the buggy to much without changing the clutch bearing. is it easy to fix and how much will the bearings cost to buy. thanks

RE: xtm xt2 help
 

Depending on the model clutch bearings will cost about $10 US and is very easy to fix.Just take the engine out, the clutch housing and bearings are held in place with one screw,there may be some shimes in there (note there position!).

RE: xtm xt2 help
 

for $10 you can get like 10-12 clutch bearings, my car when i bought it came with like 30 clutch bearings

RE: xtm xt2 help
 

i know i am goning to sound dumb but what are shims and have any of you got msn so i can speak to easier thanks

RE: xtm xt2 help
 

check the mesh

RE: xtm xt2 help
 

i ment shimes not shims but anyway wot are shimes

RE: xtm xt2 help
 

How can a car come with 30 clutch bearings?