picco p7r evo2/8ight
 

anyone know if the p7r evo2 will fit directly into my 8ight. i was told when buying my new engine that the only thing to look for was one w/ the same crankshaft(case, i get confused) type(sg) as the one in my buggy. my 8ight was an rtr but is now almost fully converted. so i still have the mach 427. but the piccos going in when i get my hanger9 gel cell from horizon for my starter box(ordered some stuff along w/ my new gel cell yesterday). well thats it, hope you can still remember my question.thanx in advance, clay unruh

RE: picco p7r evo2/8ight
 

it will fit no problems...and WIll be an Animal compared to the Mach.

RE: picco p7r evo2/8ight
 

last weekend with a p7r evo2/jp3 in an 8ight my buddy had the 3 fastest laps out of 50 buggys..so yeah id say it works nice lol..only thing you might need are race roller engine mounts and a starter box and yer rolling..

RE: picco p7r evo2/8ight
 

totally forgot about the mounts....nice catch mabuecker

RE: picco p7r evo2/8ight
 

hey integra..you know the base carb settings for a mr ninja 21? cant find anything thats definate..

RE: picco p7r evo2/8ight
 

thanx for the info. i wasnt sure if i needed a new engine mount so i didnt get one. looks like im going to have to wait another month to get-er going. would the losi quick change engine mount be sufficiant. thanx agian, clay unruh

RE: picco p7r evo2/8ight
 

Not exactly...but i know they need a Fatt top and lean bottom....fat on top being almost flush with the housing but a turn or 2 Lean...and the bottom well.....where ever it wants to run right....not all mills run the same on the same needle setting ive found.

RE: picco p7r evo2/8ight
 

im gonna go 4 top about 5 bottom..thx4 the pointer integra..i seen you had an mr in a pic at 1 time..i apoligize 1cougar1 for hijacking your thread.