ops.67 setting please
06-01-2007, 01:28 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Location: , QC, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
ops.67 setting please
[:@] hy guys i just buy new ops .67 end no instruction in the box. any body no this setting arround here please sorry for my english i am not so good to write it. i wont to no the low END HI NEEDLE SETTING please anybody help me. [
][]
][]
06-01-2007, 09:28 AM
#2
Banned
Join Date: Sep 2006
Location: Blue Ridge,
GA
Posts: 1,344
Likes: 0
Received 0 Likes
on
0 Posts
RE: ops.67 setting please
Normally i start off with about 2 turns out from closed on the low end needle. Needle settings will vary depending on different air conditions, altitude, etc. 2 to 2-1/2 should get going.
Can you post a pic of the carb? Ive been trying to locate a ops carb for the 60's motors with a low speed needle as my ops 65 carb only has a high speed
Can you post a pic of the carb? Ive been trying to locate a ops carb for the 60's motors with a low speed needle as my ops 65 carb only has a high speed
06-01-2007, 02:09 PM
#3
Junior Member
Thread Starter
Join Date: Jun 2007
Location: , QC, CANADA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: ops.67 setting please
this is the pick of the carb to yu no a good rich setting for the first start i just blow my k&b engine i dont want to blow this want tank you for the low needle ajustement 2 turn out right...
