prop upgrade
02-17-2010, 10:15 PM
#1
Junior Member
Thread Starter
My Feedback: (1)
Join Date: Feb 2010
Location: santa rosa, CA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
prop upgrade
Hellow just looking for some advise on prop selection for a miss elam with a supertiger .18 instaled I already have a grimracer 36x55 but with the engine change it is at peak rpm at 3/4 throttle looking for more top end.Also have a brushless fastech and running 7 cell 5000 battery also looking for more top end any advise would be helpfull thank you.
02-19-2010, 11:33 AM
#2
Senior Member
Join Date: Jul 2005
Location: Center City,
MN
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
RE: prop upgrade
Noticed your question yesterday, but as I'm no prop person, I let it pass for other more experienced people to chime in on. But I see that today you still havent gotten any response - hate to see that.
I would suggest you call Mark Sholund (his website is props4u.com) and he should be able to help you - he does many, many propr every year (sells/sharpens/balances them) and is a really nice guy. [8D]
todd
I would suggest you call Mark Sholund (his website is props4u.com) and he should be able to help you - he does many, many propr every year (sells/sharpens/balances them) and is a really nice guy. [8D]
todd
02-20-2010, 01:10 AM
#4
RE: prop upgrade
I don't know what's on there right now but the Aquacraft site says this:
UL-1 Superior L40x57/3 AQUB9760
That would make it close to an Octura 440/3. If the above prop is what you have you could move up to an X-640 for more pitch or if you want to try a lifting prop, a 1440 or 1640.
UL-1 Superior L40x57/3 AQUB9760
That would make it close to an Octura 440/3. If the above prop is what you have you could move up to an X-640 for more pitch or if you want to try a lifting prop, a 1440 or 1640.
