Wildcat2514

Hi all

I'm looking for some bearings for my sons wheels for is car there off a hobbyking sandstorm 1/12.
tried hobbyking but cannot find them anywhere.
or even better some wheels and tyre sets that would fit this car with a bearing.

i would put a picture on but says i cannot upload anything yet

Any help would be great

Thanks

BarracudaHockey

My Feedback: (11)

You need 10 posts to post pics, it prevents a lot of spam and porn

Just measure the bearing, i'm sure its standard. Then go to RC-Bearings.com

Outer diameter by Inner Diameter by Thickness so a 10x6x2 means a 2mm thick bearing that has a 10mm OD and 6mm OD.

kistner

My Feedback: (10)

According to this page you need six 5x10x4. You can probably get them locally at a hobby store or order them from rc-bearings.com or amazon or wherever.

Wildcat2514

Great found some thanks for the help

1QwkSport2.5r

Another fantastic source for rc bearings is AVIDRC.COM. I get all of my peripheral bearings from there. They have some engine bearings, but I prefer to get those from RCBEARINGS.COM.