clutch problem.....?
 

I just finished building my gs vision a while ago and took it out for break-in. When I start the engine and even on the starter box the clutch engages and the wheels spin. Ive looked through all the manuals and such but Im still not sure how to adjust that. It has a centax clutch also. Im sure this is dumb question but I had to ask. Thanks for any help, I would really appreciate it.
Carl

RE: clutch problem.....?
 

wow, i can't wait to see a reply to your topic cuz i also having the exact problem with you on my Mugen mtx3 and its darn Centax clutch. [&o]

RE: clutch problem.....?
 

Here's some good info on the centax clutch that may help you.

RE: clutch problem.....?
 

hey, i got my Centax problem fixed by following a simple instruction from RODRIGO1508. I did this >>>"turn the tension spring of the centax clock wise until you are satisfied with the engage. There should be a .4-.7 gap when you move the clutch bell" and it works. I hope this would help you to correct your Centax problem, too.

best of luck:)

RE: clutch problem.....?
 

Car Action magazine just went over a Centax clutch this month. Check it out.