Help getting a newbie started
 

Hello all, I am brand new to the RC Hobby and I am wanting to get a car for me and my son. I don't have a clue on what to get and was looking for some advice on a car, charger accessories, ect. I am thinking probably a buggy since we will be doing some racing on a local clay track.
some things I know I want is
electric
upgradeable
speed
$500 or less to start
1/10th scale or bigger
Thanks for any advice in advance.

RE: Help getting a newbie started
 

I have a rc10b3 and It kicks ass, the rc10b4 sounds like the one you want.
It is very upgradeable and durable.

I would go for a rc10b4 factory team kit
http://www.hobbypeople.net/gallery/383388.asp

this speed controller as It looks very good
http://www2.towerhobbies.com/cgi-bin...?&I=LXHSV6&P=7

How old is your son as If he is very young he wont need a big ass motor, probaly want a
reedy quad mag
http://www2.towerhobbies.com/cgi-bin...?&I=LXFBH5&P=7

a battery from boom boom batteries, has to be 6 cell
http://www.boomboombatteries.com/index.aspx

and a good charger

a radio controller

I dont no much about radios and chargers so Ill leave that to someone else

If you got this you would have a very good car, but you dont need to get all these very powerful things for it, to cut costs you could allways get a not so powerfull speed controller if you dont need it.

This setup will probably get you just below or just over 30mph, depends on yor gearing. You might say that 30mph is slow, but on a rc car it is very fast.

Have you been using rc cars before or is this a first time.

Ben

RE: Help getting a newbie started
 

Im not into electrics, but i have a yokomo yz-48D. It has enough features for me and if your not going to be too serious about racing. Fast charge or slow, and also discharge. And you can set how quickly you want it to charge. it does 4-8 cells, and around 6000mah max. I have a large battery i bought from a local electronic store, 12v used for starting 1:1 cars. You will have to get some leads though to connect to the batteries. Not hard, just get the right connectors and solder them on. Hope that helped.

RE: Help getting a newbie started
 

Thanks for the advice guys. After doing lots of back reading on the boards here I think I'm going to get a xxx-t rtr2.

RE: Help getting a newbie started
 

Well I went down to the hobby shop and got a T4 for me and a rustler for my son.

RE: Help getting a newbie started
 

enjoy!

RE: Help getting a newbie started
 

Gentlemen, Start You Engine!:D

RE: Help getting a newbie started
 

Or plug in your batteries?

RE: Help getting a newbie started
 

Nice man now you can have wars with eachother. Great fun. thats what I do with my rcd10b3 and my friends rc10b4. I win because mines heavier and super amazing lol.

p.s in a battle rustle would most likely win, not like you will though

Ben