Indoor RC combat with Clean Cut
#1
Junior Member
Thread Starter
Join Date: Oct 2005
Location: , DENMARK
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Indoor RC combat with Clean Cut
Hi Folks
Here is the brand new thing from Denmark. Indoor RC combat. The models are all Clean Cuts by Cigar Box Models (Produced and designed by me)
Specs about "Clean Cut"
Span: 65 cm
Weight: 190 Grams
Motor: 19 gr BL outrunner (Turnigy 2204-14T)
Servos: 2x5 gr´s
Battery: 500-750 mAh
The model is extremely easy to fly (several people have learned flying RC with it) and yet very agile. We are having a lot of fun with compeeting in three diciplines.
1. LimPyl: A mix between Limbo and Pylon flying. As many fly throughs between and under two volley nets in three minutes.
2. All In: Everyone gets airborne and fight at the same time. Once your tail is cut - you land.
3. One on one: Individual dog fights
Watch the video and let me know what you "Aces" think
http://www.youtube.com/watch?v=YKjM_0HWxJo
Here is the brand new thing from Denmark. Indoor RC combat. The models are all Clean Cuts by Cigar Box Models (Produced and designed by me)
Specs about "Clean Cut"
Span: 65 cm
Weight: 190 Grams
Motor: 19 gr BL outrunner (Turnigy 2204-14T)
Servos: 2x5 gr´s
Battery: 500-750 mAh
The model is extremely easy to fly (several people have learned flying RC with it) and yet very agile. We are having a lot of fun with compeeting in three diciplines.
1. LimPyl: A mix between Limbo and Pylon flying. As many fly throughs between and under two volley nets in three minutes.
2. All In: Everyone gets airborne and fight at the same time. Once your tail is cut - you land.
3. One on one: Individual dog fights
Watch the video and let me know what you "Aces" think
http://www.youtube.com/watch?v=YKjM_0HWxJo
#3
Junior Member
Thread Starter
Join Date: Oct 2005
Location: , DENMARK
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Indoor RC combat with Clean Cut
HI
Sorry I haven´t gotten around to producing a plan as such. The kit costs 40 USD.
The materials are: 6 and 3 mm Depron, 0,8x3 mm carbon strip and 2 mm carbon rod, 1,5 mm balsa, a type of special foam for the nose.
This model will go half throttle directly into a brick wall, and not suatain any damage.
From the kit it takes app. 2 hours to complete the model (including RC installation)
More video
http://www.youtube.com/watch?v=YzosR4V9fmo
Sorry I haven´t gotten around to producing a plan as such. The kit costs 40 USD.
The materials are: 6 and 3 mm Depron, 0,8x3 mm carbon strip and 2 mm carbon rod, 1,5 mm balsa, a type of special foam for the nose.
This model will go half throttle directly into a brick wall, and not suatain any damage.
From the kit it takes app. 2 hours to complete the model (including RC installation)
More video
http://www.youtube.com/watch?v=YzosR4V9fmo