Gremlin Plans?
 

Good Day All,

Where can I find some On line Gremlin Plans?

Any information about the type of airfoil used would be helpful.

Thanks

Marcus

Gremlin Plans?
 

Here's my Gremlin. The plane- Gremlin $35.00 kit. Fuse- 17 1/8 long. Engine- OS .046 AXII. Engine mount- Dave Brown 4650. Fuel tank- Dubro 8 oz. Servos- JR 47BB sport. Picture of girl on fuselage. priceless.

My Gremlin
 

Take my advise-just buy the $35.00 Gremlin kit instead of wasting a bunch of time and money trying to figure it out. But good luck either way.

Hey Marcus- I hope you have plenty of flying time, to fly the Gremlin. They fly like a nice little sport plane if flying slow. If you have a good performance engine, watch out! This plane will react very fast. This plane is like a Indy car with wings. I came out a split-s high dive and put it to full throttle when I started to pull the nose up. This plane shot across the field at 131mph on radar! The engine at that time was a OS .35 right out of the box. No modifications.

Dave, your "Gremlin" looks like a SPAD Sickle to me. I have a pair of them with TT Pro .46 engines. You are correct. Hang on to your hat when you open the throttle. Mine have become my every day flyers since I have so much fun with them.

Gremlin fun
 

Square Nozzel-My plane is a $35.00 Gremlin kit, but I cut my own fuse. I use a old Gremlin fuse for a pattern. but cut the front off. How do you like the TT Pro engine? I see they cost a lot less than my OS .46 AxII. It also looks like the os has a little more hp 1.63, your engine is 1.43. Happy flying to everyone

Dan, I've been very happy with the thunder tiger engines. Never had a problem with them and they turn what sounds like pretty high RPM in the air. Never had a tach on them. I always avoided OS because of the liner plating issues they had a while ago. The price was also a factor. There must be something to them. The Quicky 500 guys in New England use the box stock TT40 exclusively.

I spent some time in your area back in the early 60's. I was stationed at Selfridge in an Air Refueling Squadron. My wife came from western Michigan. No ties there anymore.

Launched my plane with this mount yesterday, wasn't good for this plane. going back to flat mount.

Where do I find the $35 Gremlin kit mentioned?

thanks!

RA cores-Tell jim dan from detroit sent you.
Wtih the $35.00 kit u build pre-cut wing and throw the fins together. For $75.00 the wing and fins are built and ready to cover.I can help u if u like.
What engine u gonna use? [email protected]
http://www.rcuniverse.com/forum/atta...mentid=2073308http://www.rcuniverse.com/forum/atta...mentid=2073308