drifting RS4 Nitro 3
 

ok iv just seen a video of drifting and wanna do it realy bad but i have a mt so im going to buy a RS4 Nitro 3 just for drifting. wot wanna know is wot will i need to get my RS4 Nitro 3 to drift (gear ratio, tyres, suspention setup ect)

thanx

RE: drifting RS4 Nitro 3
 

you will just need a abs pipe or a pvc pipe also get extra clutchs incase you melt the other ones.......

RE: drifting RS4 Nitro 3
 

and get the drift tires from yokamos new drift car

RE: drifting RS4 Nitro 3
 

The thing is they get worn out really quickly even with electric, so with nitro, they probably would wear own within a run or two.

RE: drifting RS4 Nitro 3
 

ABS (black) pipe will last a LONG time, but you won't have the speed or quite the same control as you would with the yokomo tires. ABS is also dirt cheap

RE: drifting RS4 Nitro 3
 

becareful if you make drifter, i made some for my yokomo gr-4 and i almost over revved the engine because there was no traction at all

RE: drifting RS4 Nitro 3
 

i ment *drifters*

RE: drifting RS4 Nitro 3
 

dont be scared to over rev, HPI motors are strong and durable they can take it trust me...

if you are gonna use rubber or hard foams:
set up a stiff suspention stiff springs, heavy shock oil, thick sway bars, hard rubber or foam compound tires and your set

for ABS or PVC:
thats all you need