Some drifting issues, need help
 

ive had my tt01 for a few months now and put on some t-drift tires on a fresh set of wheels about a week or 2 ago. they sure took a lot of getting used to but im having some problems i think are more car related, than just the tires alone.

some info on the car:
tt-01 chassis
locked rear diff
stock front diff
t-drift tires
3300mah batteries
23t turn motor
adjustable camber front and rear a-arms

the issue:
when drifting i can hold a left turn drift, while counter-steering right, very very well. the car handles these great. but when right turn drifting, counter-steering to the left, the car wants to spin out 100% of the time no matter how slow i go. if the car is at a stand still and i lightly hit the gas it wants to spin out to the right. ive adjusted my steering servo and it is infact centered, i think its more of a drive-line issue.

any ideas? [sm=confused.gif]

RE: Some drifting issues, need help
 

how tight is the front diff? sounds like it's coming unlocked and spinning just 1 wheel

RE: Some drifting issues, need help
 

you mean the rear diff? i havent touched the front diff, so its completely stock. the rear diff is locked via the method of putting 1 of the 3 spider gears between the 2 so im pretty sure it has no chance of even coming unlocked or loose since those gears are all meshed together and locking one another.

RE: Some drifting issues, need help
 

sounds like a left to right weight bias issue to me. Is the battery on the left or right? Are you running Lipo or NiMh?

RE: Some drifting issues, need help
 

im running nimh and the battery sits on the passenger side, heres a pic of my tt01 chassis:

http://farm5.static.flickr.com/4019/...6f7ef34715.jpg

could it be a camber or caster issue? or maybe if 1 side of the cars suspension is softer than the others?

RE: Some drifting issues, need help
 

I'd say the check suspension and camber,
I doubt its a weight balance issue, otherwise more people would have this problem with their TT-01...

If that still doesnt fix it, id take the diffs apart, rebuild them and relube them