e-revo questions
07-22-2009, 10:14 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Location: woodbury,
MN
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
e-revo questions
would a spektrum SR3000 reciver work in a e-revo? i am asking because the e-revo uses 2 sevros for the steering. also i am putting in a novak hv maxx 6.5 motor in it. what size pinion should i buy for it? and what other upgrades should i buy for it for hard bashing?
thanks
thanks
07-22-2009, 10:44 PM
#2
Senior Member
Join Date: Aug 2007
Location: Edmonton,
AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
07-22-2009, 10:53 PM
#4
Senior Member
Join Date: Aug 2007
Location: Edmonton,
AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
I'm sure you could... why don't you enter Y harness in towers search box and find out?
As for the HVMax... not sure on the gearing as I have a MMM in my erevo, it would really depend on what you're doing with it. Mostly on road, mostly off road? what kind of batteries?
As for the HVMax... not sure on the gearing as I have a MMM in my erevo, it would really depend on what you're doing with it. Mostly on road, mostly off road? what kind of batteries?
07-22-2009, 11:02 PM
#6
Senior Member
Thread Starter
Join Date: Aug 2007
Location: woodbury,
MN
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
07-22-2009, 11:09 PM
#7
Senior Member
Join Date: Aug 2007
Location: Edmonton,
AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
ORIGINAL: novakmaxx
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
As I don't have the HVmax myself I'm going to leave that for someone else.
07-22-2009, 11:17 PM
#9
Senior Member
Thread Starter
Join Date: Aug 2007
Location: woodbury,
MN
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
what is the stock spur gear size on it (i dont have one yet)? also i have read a bit and herd that the suspension is really soft. what is a good set up that is good for big jumps? what rockers should i get?
07-22-2009, 11:52 PM
#10
Senior Member
Join Date: Aug 2007
Location: Edmonton,
AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
ORIGINAL: dacaur
No that wont work because of that big fat thing in the middle. I would recomend something like this, http://www3.towerhobbies.com/cgi-bin...?&I=LXH451&P=7
or this http://www3.towerhobbies.com/cgi-bin...?&I=LXHZW5&P=7
ORIGINAL: novakmaxx
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
or this http://www3.towerhobbies.com/cgi-bin...?&I=LXHZW5&P=7
07-23-2009, 08:59 AM
#11
Senior Member
Thread Starter
Join Date: Aug 2007
Location: woodbury,
MN
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
with this http://www3.towerhobbies.com/cgi-bin...?&I=LXHGD4&P=V need a new push rod?
07-23-2009, 01:54 PM
#12
Join Date: Apr 2005
Location: midvale, UT
Posts: 2,658
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
ORIGINAL: Druss
Why wouldn't it work? Besides looking a little bulky there is no practical difference between them. Personally I've got so many stock switches sitting around I would just make my own.
ORIGINAL: dacaur
No that wont work because of that big fat thing in the middle. I would recomend something like this, http://www3.towerhobbies.com/cgi-bin...?&I=LXH451&P=7
or this http://www3.towerhobbies.com/cgi-bin...?&I=LXHZW5&P=7
ORIGINAL: novakmaxx
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
this is what i need for the y harness right? http://www3.towerhobbies.com/cgi-bin...&I=LXTSK3&P=ML
or this http://www3.towerhobbies.com/cgi-bin...?&I=LXHZW5&P=7
07-23-2009, 01:55 PM
#13
Join Date: Apr 2005
Location: midvale, UT
Posts: 2,658
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
ORIGINAL: novakmaxx
with this http://www3.towerhobbies.com/cgi-bin...?&I=LXHGD4&P=V need a new push rod?
with this http://www3.towerhobbies.com/cgi-bin...?&I=LXHGD4&P=V need a new push rod?
07-23-2009, 07:56 PM
#16
Junior Member
Join Date: Apr 2009
Location: Burlington,
ON, CANADA
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: e-revo questions
The stock spur size is 19 tooth although it should be 17 because it runs really hot. As for the pinion for the HV I am not sure but if you are using the stock motors for a bit you might want to put 17 tooth gears in. Hope this helps.
