4WD Slash esc mounting troubles
I almost got the electronics mounted in my 4wd slash but where do i mount the speed controller?
These trucks are so weird to where everything is mounted.[:-] |
RE: 4WD Slash esc mounting troubles
either make a new plate or get the STRC mounting plate that uses the stock ESC mounting screws. The STRC piece is really nice.
|
RE: 4WD Slash esc mounting troubles
1 Attachment(s)
i used the two holes behind the front shock tower to relocate the reciever and made a plate out of some thin plastic and mounted it slightly forward of the stock esc location and secured the esc with high strenght3m double side tape. you will have to trim the rec box inlet to clear the battery hold down but it is a nice fit when finished.
|
RE: 4WD Slash esc mounting troubles
i mounted my esc in the front like chase's radio box. thinkin i might switch.
|
RE: 4WD Slash esc mounting troubles
I just dremeled the plastic ribs out and created a flat spot to mount my esc. Cheap and easy.
|
RE: 4WD Slash esc mounting troubles
1 Attachment(s)
Those screw holes are for sway bars. Heres mine. Of course it is an older pic, but my mounting spots havent changed
|
RE: 4WD Slash esc mounting troubles
i am speaking of the holes about 1 1/2 inches back on the chassisdirectly in front ofthe servowith nothing in them. my truck also has swaybars. i did not use those holes.
|
All times are GMT -8. The time now is 03:35 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.