1/10 scale upgraded 70+mph
#1
Junior Member
Thread Starter
Join Date: May 2013
Location: lynn,
MA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
1/10 scale upgraded 70+mph
Hey im new to the racing, one week in. I have been doing a lot of reading and reserch to educate my self more. Through browsing i notice ur wide knowledge and wisdom and im hoping i might be able t help me please.vmy toal is to get to 70+mph and ill be satisfied, for now lol.
*********One of my BIG question is is the 3S battery going to fit in the battery holder? ******
Iorder the parts for upgrade already but havent gotten the car yet, now im second guessing if i made a mistake ordering first.
Traxxas 3340 cooling fan velineon ESC
Battery traxxas powercell lipo 3 cell 6400Amh 11.1v
*********One of my BIG question is is the 3S battery going to fit in the battery holder? ******
Iorder the parts for upgrade already but havent gotten the car yet, now im second guessing if i made a mistake ordering first.
I bought a epx 1/10 scale electric car-
Motor TypeElectric Brushed 27T 540
TransmissionForward and Reverse
Drive System4 Wheel Drivem
Length360mmWidth200mmHeight112mmWheelbase260mm (F/R)Ground Clearance4.5mm
Chassis TypePlasticShocksAluminum Body Oil Filled
Battery7.2v 1800Mah NiMh Battery Pack
Radio System2 Channel AM
I bought the following in order to get it where i want too be
Traxxas 2933 ez plus charger plus 6 amp lipo/nimh chargerTraxxas 3340 cooling fan velineon ESC
Battery traxxas powercell lipo 3 cell 6400Amh 11.1v
This is the Traxxas Velineon Extreme Brushless Waterproof Power System
for electric powered R/C vehicles.
FEATURES: Each component engineered to work wih each other to eliminate
restrictions and allow maximum power flow
Velineon VXL-3s ESC;
Auto-detects and compatible with brushed, brushless and sensored
brushless motors
Compatible with NiCd, NiMH (4-10 cells) and 2-3 cell LiPo battery
packs-two stage low voltage detection for LiPos
Three driver profiles-Sport, Race and Training Modes
Gold-plated motor connectors
Built-in output for optional auxiliary cooling fan
Velineon 3500 Brushless Motor;
10-turn 3500kV
Optimized for extreme power and efficiency in1/10scale vehicles
Ultra high temp neodymium magnets, high-speed ball bearings
Precision balanced rotor
Traxxas High-Current Connector
Reverse polarity protection makes backward connections impossible
Compatible with high-current 12-gauge wire
Gold-plated wide surface terminals
Textured surface for easy gripping
INCLUDES: Velineon VXL-3s ESC, Velineon 3500 Brushless Motor and high-current connector
REQUIRES: Installing in vehicle
NiCd, NiMH (4-10 cells) or 2-3 cell LiPo battery
SPECS: VXL-3s
Input voltage: 4.8-11.1V (4-10 cells NiMH or 2S-3S LiPo)
Supported motors: Brushed/Brushless/Sensorless brushless
Motor Limit: None
Continuous current:200A
Peak current:320A
BEC voltage 6.0V DC
Transistor type: MOSFET
On-resisteance: 0.00075 ohms Max (0.006/8 FETs)
PWM frequency: 12,000Hz
Battery connectors: Traxxas High-Current Connector
Motor connectors: TRX 3.5mm bullet connectors
Motor/battery wiring: 12-gauge Maxx Cable
Thermal protection: 2-ge thermal shutdown
Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm)
Weight: 3.17oz (90g)
Velineon 3500 Motor
Type: Sensorless brushless
RPM/volt: 3500 (10-turn)
Magnet type: Ultra High-Temperature, sintered neodymium
Connection type: TRX 3.5mm bullet connectors
Wire Size: 12-gauge Maxx Cable w/solder tabs
Current Ratings: 65A constant;100Apeak/burst
Max RPM: 50,000
Diameter: 1.42" (36mm) (540 size)
Length: 2.165"(55mm)
Weight: 9.24oz (262g)
#2
Junior Member
Thread Starter
Join Date: May 2013
Location: lynn,
MA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/10 scale upgraded 70+mph
I forgot to ask, would there be any other modifications i would have to do to avoid any mishaps? Eg would i need to upgrade the stock servo.
any and evrything sugestion would be helpful, unfortunately dont know anyone near me who is into rc racing cars to lean in for help, there is one hobby shop half an hour from me, i dont think they will be willing to help me install the new upgrades for free so ill b doing it myself
any and evrything sugestion would be helpful, unfortunately dont know anyone near me who is into rc racing cars to lean in for help, there is one hobby shop half an hour from me, i dont think they will be willing to help me install the new upgrades for free so ill b doing it myself
#3
RE: 1/10 scale upgraded 70+mph
Before dropping big bucks on electronic supporting systems, check out hobbyking.com for chargers, lipos, and supporting accessories. And check castle creations.com for quality speed controls and motors! Welcome to the fun!
#5
Junior Member
Thread Starter
Join Date: May 2013
Location: lynn,
MA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/10 scale upgraded 70+mph
Do u think ill be ale to fit the 3s batterry in the battery slot?. If not whats the high power i can use that will fit? Pleasee help