brushless motor needed for 6s lipo
 

Hi all,
New to the forum like to say hello to all...;)

Im looking to buy a new motor for my bl cage 1/8th buggy just bought a couple of (zippy flightmax 5000mah 6s1p 40c lipos , my current motor is a 2370kv dont think this will be much use on 6s
ive tried it a couple of times but getting very hot so im after another motor to run the 6s lipo,can you recommend any.

thanks all.


Andrew.

That's spinning the motor up pretty high, I would recommend something under 2000kv. To stay inexpensive try a trackstar motor or up it a little and run a 40 series from lepoard.