Aerofly Pro interface/TX problem..
 

Hi.

I`m having problems getting my sim. to work with my Futaba 9C. Any suggestions on what could be wrong? Here is a part of the log file..:

tminput: searching for input devices...
tminput: checking for transmitter on comport 1=found, but no signal, t=7
tminput: checking for transmitter on comport 2=createfile failed
tminput: checking for transmitter on comport 3=(receiving) none
tminput: closing comport
tminput: checking for transmitter on comport 4=(receiving) none
tminput: closing comport
tminput: checking for transmitter on comport 5=createfile failed
tminput: checking for transmitter on comport 6=createfile failed
tminput: checking for transmitter on comport 7=createfile failed
tminput: checking for transmitter on comport 8=createfile failed
tminput: 1 devices found
directinput: searching joystick=none
tminput: searching for input devices...
tminput: checking for joystick=fail
tminput: 1 devices found
loading input device calibration config/radio0.tmc=ok
.....

PS: I have switched to PPM..

Thanks.

RE: Aerofly Pro interface/TX problem..
 

wiggle the mouse and be sure the tx is turned on.