|
Extra330S ????????????????
Hey guys I have been flying AFP for about 3 weeks now and have gotten semi good torque rolling the stock cap and the giles,, I have bought the expansion pack and have been trying to torque roll Roland Matts Extra 330s every time I try to bring it up in a torque roll it wants to fall forward hard, I can hold full up but it wants to fall every time is there some secrets i'm missing out on or any set up numbers I need to know, the help would be greatly appreciated..[:o]
|
RE: Extra330S ????????????????
Well the Extra is almost 100% realistic and that is how they fly so don't think you are doing something wrong. The Giles is just much more forgiving.
There really is no secret other then you have to be ahead of the fall if that is what it is doing. DO NOT adjust a single thing on that plane if you want to keep it scale. That plane was dialed in my Roland himself as I know that one for a fact from the head designer of IPACS. It's just practice. Just stay ahead of it. |
RE: Extra330S ????????????????
ORIGINAL: jongurley Hey guys I have been flying AFP for about 3 weeks now and have gotten semi good torque rolling the stock cap and the giles,, I have bought the expansion pack and have been trying to torque roll Roland Matts Extra 330s every time I try to bring it up in a torque roll it wants to fall forward hard, I can hold full up but it wants to fall every time is there some secrets i'm missing out on or any set up numbers I need to know, the help would be greatly appreciated..[:o] Try the following mods : Throws: all 60° except rudder= 50° CG: +3.0 cm eng: 12 kw, torque: 40% prop: 31x10.6 max rpm= 8200 gross weight= 15900g Nice balance for 3D and IMAC |
| All times are GMT -8. The time now is 02:29 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.