G3 Mix Jaafit Help
 

Is there a way to program a mix of down elevator with the flaps, using the realflite controller in G3? Thanks George

RE: G3 Mix
 

Yes, you can do this in the aircraft editor. In the "Software Radio" add a "complex input feed" to your elevator channel, and have that input assigned to flaps, then mix that input with the elevator. If you need more detailed instructions let me know.

RE: G3 Mix
 

Thanks jaafit I will try that. George

RE: G3 Mix
 

Jaafit I would like more detailed instructions, I tried it but couldn't do it. Thanks George

RE: G3 Mix Jaafit Help
 

1. Open the Aircraft Editor
2. Expand the "Software Radio" Tree
3. Right-click "Output Channel 2" and select "Add Complex Input Feed"
4. Change "Input Channel" to Input Channel 4
5. Click on <<Graph Points>> then click the '...' button that appears on the right.
6. If you want the elevator to go up with rudder input, drag the graph point on the right downwards to match the graph point on the left, if you want the elevator to go down with rudder input, do the opposite.
7. Click Ok
8. Click "File->Exit" choose Yes to save, and enter a new name for your aircraft.

RE: G3 Mix Jaafit Help
 

Thanks a lot, that is a big help. George