Go Back  RCU Forums > RC Cars, Buggies, Trucks, Tanks and more > RC Giant Scale Cars
Reload this Page >

Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Notices
RC Giant Scale Cars For all those who love driving large scale rc cars share your projects or ask questions here.

Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Old 12-06-2010, 12:08 PM
  #101  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: Sherv

I have never seen a good RTR servo on a 1/5 scale.. But if I recall FG RTRs come with Hitec Servos and Radio.. THats the only one I know of that comes with good servos.
I have never had a problem with HPI's 1/5 scale RTR servos. Worst case you put a metal gear kit in place of the stock plastic gears, but the electronics were fine.
Old 12-06-2010, 12:18 PM
  #102  
mooman007uk
Senior Member
 
mooman007uk's Avatar
 
Join Date: Jan 2008
Location: parksville, BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

welcome to the rampage world Dale...at least they've addressed most of the other problems they had with the earlier versions...I had a V1 and had to use the dogleash everytime i ran it to drag it back to my truck. Still take it with me when i run mine but it's far from stock now and alot more reliable. I've about 5 tanks in a row thru it now and only broken 3 dogbone pins, nothing else[X(] that is a record worthy of the guiness book of moo
Old 12-06-2010, 12:25 PM
  #103  
noyb98098
Senior Member
My Feedback: (1)
 
Join Date: Jan 2008
Location: Ashburn, VA
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Agreed- my steering servo from the HPI baja ss kit is still going strong after 3 years of abuse..
Old 12-06-2010, 12:33 PM
  #104  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: mooman007uk

welcome to the rampage world Dale...at least they've addressed most of the other problems they had with the earlier versions...I had a V1 and had to use the dogleash everytime i ran it to drag it back to my truck. Still take it with me when i run mine but it's far from stock now and alot more reliable. I've about 5 tanks in a row thru it now and only broken 3 dogbone pins, nothing else[X(] that is a record worthy of the guiness book of moo
I think I am probably over the hump now with all of the changes I made. I suspect that I will get some mileage out of it now though the true cost of getting it this way puts the $650 Rampage in the ballpark of other 1/5 scales. Including the radio, 2x 1/5 servos and 1x standard throttle servo, air filter, etc. and not including 'optional' parts I am into the truck about $1,000 now.
Old 12-06-2010, 01:03 PM
  #105  
noyb98098
Senior Member
My Feedback: (1)
 
Join Date: Jan 2008
Location: Ashburn, VA
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Your kill'n me lol.... But they have come A LONG way.. I've been through almost 5 tanks in a row without any issues, which is a record in my book of Redcat..Only took about 2years to get it that way, better late then never..

ORIGINAL: mooman007uk

I had a V1 and had to use the dogleash everytime i ran it to drag it back to my truck. Still take it with me when i run mine but it's far from stock now and alot more reliable. I've about 5 tanks in a row thru it now and only broken 3 dogbone pins, nothing else[X(] that is a record worthy of the guiness book of moo
Old 12-06-2010, 02:21 PM
  #106  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

I just ordered a new body and 5T wheels/tires for this and then it's done.
Old 12-06-2010, 03:46 PM
  #107  
RAMTech-HBF-LSF
 
Join Date: Nov 2007
Location: Chandler, AZ
Posts: 856
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

You actually only need one HPI servo. It can handle the load with no problems.
Old 12-06-2010, 04:02 PM
  #108  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: RAMTech-HBF-LSF

You actually only need one HPI servo. It can handle the load with no problems.
Ok, don't tell my wife that.
Old 12-06-2010, 06:53 PM
  #109  
pwaicon
Senior Member
 
Join Date: Feb 2007
Location: Hemet, CA
Posts: 685
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

ORIGINAL: joester

dude that teflon clutch is stock on there?
I don't think so, that engine in the picture is the one I have in my Hurrax. He lifted that pic of of my build thread, it is on pg. 2 post #37.


Dale,
Nice write up on the Rampage, do you plan on taking it to Milestone and see how it handles the track?
Old 12-06-2010, 07:08 PM
  #110  
Noom-RC-Thailand
Junior Member
 
Join Date: Nov 2010
Location: Bangkok, THAILAND
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

No, i order some Hobby shop in Thailand(My local)....

http://www.kermithobbyshop.com/index.php
Old 12-06-2010, 07:43 PM
  #111  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: pwaicon

Dale,
Nice write up on the Rampage, do you plan on taking it to Milestone and see how it handles the track?
I definitely will be racing it soon... I need to dump these tires for something lighter that will spin up faster. I am still faster with my 5T.
Old 12-13-2010, 02:17 PM
  #112  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

I have a bunch of goodies coming in tomorrow... Exhaust, wheels, tires, body, etc.

Stay tuned!
Old 12-13-2010, 02:34 PM
  #113  
DarkFire989
Senior Member
 
DarkFire989's Avatar
 
Join Date: Jan 2007
Location: Northborough, MA
Posts: 6,626
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Jeeze how much money do you have into this thing. Not really the budget MT anymore.
Old 12-13-2010, 04:54 PM
  #114  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

ORIGINAL: DarkFire989

Jeeze how much money do you have into this thing. Not really the budget MT anymore.
That is an interesting observation which brings up an interesting point I want to make. My previous 1/5 scale experiences were HPI Bajas only. The HPI Baja 5B/5T is a tremendous platform and is super fun and fast. Bajas can throw roosts and do donuts all day long with impressive acceleration. HPI Baja 5B/Ts are everything that people say they are. They do live up to the hype. I ran the stock electronics without issue and my 5T still has its original radio gear almost 2 years later. I have had to replace parts here and there, but nothing out of the ordinary. Parts are readily available and hop-ups are endless. The Baja is my 1/5 benchmark for 1/5 scale.

So, a few months ago, I am looking for another 1/5 scale. I REALLY, REALLY like the Bajas but I wanted something different. The Redcat Rampage MT caught my eye and there was enough positive information for me to go for it. Honestly, after running the Rampage a few times, I can say that the Rampage is a little slow in stock trim and I am frustrated that the stock radio gear is par-subpar. In my opinion, the Rampage MT is not enough to satisfy a Baja owner out of the box. It is a little sluggish and feels slower. I think this is mostly due to truck's overall weight and the large size and weight of the tires/wheels. Perhaps the other iterations of the platform like the buggy are faster and more responsive. My guess is that they are so I won't pass judgment on those platforms.

I have been on a quest to build my Rampage to give me the same amount of satisfaction that my Bajas have. I think I will get there, and I really do like the Rampage and the support and Redcat Rampage community. I am having fun building it up and have no intention of getting rid of it. I would still recommend the Rampage, but I would say to prospective owners: be prepared to buy a steering servo and get a good tuned pipe to wake the engine up.

Even after a pipe and servo, the Redcat Rampage is still a good deal cheaper than the HPI Baja and the 4wd gives a lot more control over the terrain. I am excited that the Rampage continues to gain market support and is now getting parts made from popular HPI Baja aftermarket vendors. Parts are cheap and availability is good.
Old 12-13-2010, 04:58 PM
  #115  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Plus, the Redcat Rampage IS a brand name; it doesn't have the 'clone' stigma surrounding it. Although it is an OEM platform made by another manufacturer, Redcat makes it their own and supports it very well. The Redcat Rampage is supported by the large scale community as a legitimate platform. Since I run with a bunch of 1/5 scale HPI 'purists' that shun clones, that is a good thing for me.

I have taken the Rampage to a few large scale events, and it is acknowledged as a legit platform.
Old 12-13-2010, 10:11 PM
  #116  
RAMTech-HBF-LSF
 
Join Date: Nov 2007
Location: Chandler, AZ
Posts: 856
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Dale, put some Baja tires on it and it will perform much better for your taste. The Big MT tires are great for bashing and running over things, but its not a Baja at that point. 2 different classes.
Old 12-14-2010, 07:59 AM
  #117  
mooman007uk
Senior Member
 
mooman007uk's Avatar
 
Join Date: Jan 2008
Location: parksville, BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

but its not a Baja at that point
lol, so putting baja tires on it will make it one???...if you buy an MT in the first place surely it's because you wanted an MT and not an MT with little wheels on it may have well just bought the TT then
If you want more get up and go I'd suggest a race ported or full mod 30.5 and a good pipe; comparing it to the 5T isn't really a good idea...as said in the previous post they're 2 totally different classes...the hpi's are rocket ships in a straight line so expecting 38lb of MT with a mediocre engine to go as fast is hoping a bit...

and wow you run with a pretty uppity crowd if you're not welcome with a clone, do you have to go thru park ferme as well to make sure you don't have any cloned parts[X(] so much for 1/5scale camaraderie
Old 12-14-2010, 09:47 AM
  #118  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: mooman007uk

lol, so putting baja tires on it will make it one???...if you buy an MT in the first place surely it's because you wanted an MT and not an MT with little wheels on it may have well just bought the TT then
If you want more get up and go I'd suggest a race ported or full mod 30.5 and a good pipe; comparing it to the 5T isn't really a good idea...as said in the previous post they're 2 totally different classes...the hpi's are rocket ships in a straight line so expecting 38lb of MT with a mediocre engine to go as fast is hoping a bit...
Comparing it to a 5T is perfectly legitimate. They are both 1/5 scale platforms and they are both trucks. The tire diameters are close. A 1/10, 1/18 or 1/8 scale 2x4 truck is pretty comparable to a 1/10, 1/18 or 1/8 scale 4x4 truck in terms of acceleration and speed even though the 4x4s typically weigh 20-30% more. They aren't orders of magnitude different. I did expect the Rampage MT to be in the ballpark of the 5T in terms of acceleration and speed, at least within 10-20%. That isn't an unrealistic assumption without knowing anything else about the platform.

Plus, this is my review and it is good to let other potential buyers know what they may expect.

ORIGINAL: mooman007uk

and wow you run with a pretty uppity crowd if you're not welcome with a clone, do you have to go thru park ferme as well to make sure you don't have any cloned parts[X(] so much for 1/5scale camaraderie
HPI is a local company for me and sponsors many of the local events I participate in. So, it is frowned upon to bring a cloned 5B or 5T to an HPI sponsored event but it's not like they have a tech inspection to confirm originality or anything.
Old 12-14-2010, 02:50 PM
  #119  
mooman007uk
Senior Member
 
mooman007uk's Avatar
 
Join Date: Jan 2008
Location: parksville, BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Fair points on both quotes
Old 12-14-2010, 04:07 PM
  #120  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Aw, some goodies showed up today... Honestly in retrospect, I can't believe I spent $200 for 4 wheels/tires, 4 HPI Hexes and 4 hex nuts. Fifth scale is not cheap....



And the new body, I am hoping to splash some paint on it tonight.

Old 12-14-2010, 04:20 PM
  #121  
RAMTech-HBF-LSF
 
Join Date: Nov 2007
Location: Chandler, AZ
Posts: 856
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Good choice on the wheels and tires. That is what my son runs at Milestone.
Old 12-14-2010, 04:31 PM
  #122  
noyb98098
Senior Member
My Feedback: (1)
 
Join Date: Jan 2008
Location: Ashburn, VA
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

Hey Dale,

Where is that body from? Looks different from the stock redcat.
Old 12-14-2010, 06:05 PM
  #123  
mooman007uk
Senior Member
 
mooman007uk's Avatar
 
Join Date: Jan 2008
Location: parksville, BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

how do those trenchers grip?, my tracks a little looser surface than milestone and has some gravelly sections.
can you get an end on pic Dale, they look more aggressive in your pics than on websites
Old 12-15-2010, 03:45 PM
  #124  
srt10
My Feedback: (20)
 
Join Date: Jan 2008
Location: Frederick, CO
Posts: 5,971
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...

is these some video of these bad boys running?
Old 12-16-2010, 01:37 PM
  #125  
Dale Gribble
Thread Starter
My Feedback: (4)
 
Dale Gribble's Avatar
 
Join Date: Sep 2003
Location: Temecula, CA
Posts: 5,692
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Redcat Racing Rampage MT V3- Let's review UPDATE: 2/24/11...gone...


ORIGINAL: noyb98098

Hey Dale,

Where is that body from? Looks different from the stock redcat.
It is the body from the Duratrax Firehammer MT... Painted pics shortly...

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell or Share My Personal Information -

Copyright © 2023 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.