1/4 scale Blueprint and instruction manual
07-13-2012, 12:46 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: KuwaitKuwait, KUWAIT
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
1/4 scale Blueprint and instruction manual
does anybody know where or how to start for a build of a V8 1/4 scale engine. i would like to start this project along with my sun. i have been searching to find a kit and instruction manuals but no can do. i found companies that sell them in the states and elsewhere.
i had an idea of getting those plastic v8 see through plastic models and mold the parts into iron.. Would this work. but then i will still need the plans for the main block for all the piping and what not.
Please let me know if anyone out there can assist..
thank you all.<o
></o>
07-13-2012, 05:23 AM
#2
Senior Member
Join Date: Jan 2008
Location: parksville,
BC, CANADA
Posts: 1,786
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/4 scale Blueprint and instruction manual
search for blueprints of the full size engines and then scale down the measurements.
you will need an extensive machine shop, or access to one, to be able to the grind crank, cam, make valves, heads, rods etc
you will need an extensive machine shop, or access to one, to be able to the grind crank, cam, make valves, heads, rods etc
07-13-2012, 05:27 AM
#3
Junior Member
Thread Starter
Join Date: Nov 2011
Location: KuwaitKuwait, KUWAIT
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/4 scale Blueprint and instruction manual
Thank you mooman007uk. will search for compleet blueprints, but i dont have all the equipment needed. might have to outsource some of the work.[/b]
07-15-2012, 10:44 PM
#5
Junior Member
Thread Starter
Join Date: Nov 2011
Location: KuwaitKuwait, KUWAIT
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1/4 scale Blueprint and instruction manual
hello Dirty_Vinylpusher
thank you for the link, they have lots of good posts. i will send stevehuckss396 an email and see what i come up with,
thanks :-)
thank you for the link, they have lots of good posts. i will send stevehuckss396 an email and see what i come up with,
thanks :-)
