Dyno ?!.. Such thing?...
#1
Member
Thread Starter
Join Date: Sep 2005
Location: fReAk cAmP, UNITED KINGDOM
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Dyno ?!.. Such thing?...
Hi, is the such thing as a RC dyno for our cars & trucks? I would like to know and prob. the rest of you how much you motors churns out e.g HP, Torque top speed etc.
Creepz...
Creepz...
#2
Senior Member
Join Date: May 2005
Location: , UNITED KINGDOM
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dyno ?!.. Such thing?...
Top speed around 30-34mph, stock single speed Leopard gearing.
http://www.zenoah.net/products/hobby/g230rc.html
http://www.zenoah.net/products/hobby/g260rc.html
http://www.zenoah.net/products/hobby/g230rc.html
http://www.zenoah.net/products/hobby/g260rc.html
#3
Member
Thread Starter
Join Date: Sep 2005
Location: fReAk cAmP, UNITED KINGDOM
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dyno ?!.. Such thing?...
I was thinking more on the terms of after market goods like 29cc big bore kit, super charger installed etc etc, but thanks
#5
RE: Dyno ?!.. Such thing?...
Its not uncommon to hear of engines in the 8 hp range depending who you listen to... most consumer engines, in reality though with a good set of mods will be in the 5 to 6 hp range.
there is no national standard for dyno's.
they are used for establishing a baseline and taking a comparison of mods or changes to an engine. dont really matter what the paticular numbers say, its weather they go up or down after your changes
there is no national standard for dyno's.
they are used for establishing a baseline and taking a comparison of mods or changes to an engine. dont really matter what the paticular numbers say, its weather they go up or down after your changes
#6
Senior Member
Join Date: Aug 2005
Location: Stockholm, SWEDEN
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dyno ?!.. Such thing?...
i dont care about no dyno charts.. just stand behind your MT, ST, Leopard, Marder, Eagle, etc on some gravel and feel how you get blastred (?? strange word)
this things aint fast standard but got pretty nice torque and HP.. with some 2-speed and tuned pipe it's a killing machine
this things aint fast standard but got pretty nice torque and HP.. with some 2-speed and tuned pipe it's a killing machine
#7
Member
Thread Starter
Join Date: Sep 2005
Location: fReAk cAmP, UNITED KINGDOM
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dyno ?!.. Such thing?...
Just luck for me I have a 29cc big bore kit, tuned pipe and 2 speed and it does fly, maybe take off if i put wings on it lol