part number needed
1 Attachment(s)
any one know the part number for the nut that attaches the brake lines to the t piece and the callipers (fg magura),nothing listed in the catalogue or set up sheets.
|
RE: part number needed
Are you looking for 9440/16? On page 147 in the catalog is a laid out diagram of the brake system. You dont see it in there?
Chris |
RE: part number needed
1 Attachment(s)
9440/16 is clampng rings - the part i need is the nut that goes over the top of the clamping rings/hydro lines,it fits on the threaded part of the "t" piece & on the threaded part of the calipers.
|
RE: part number needed
9440/14 comes with the banjo bolt and 1 nut (these mount on the caliper).
9440/18 comes with the "T" and 3 nuts. 9440/16 are the clamping rings for the caliper side of the line 9440/19 are the clamping rings for the "T" side of the line Regards, Tony R/C Modelsport |
RE: part number needed
so i need to purchase a banjo bolt for £15 just to get one nut?
|
RE: part number needed
call a hydro line business and see if they mihgt have something with the proper threads sizes ? might be worth a go ?
|
RE: part number needed
i tried the local hydro & fastener companys they said the parts were to small and to contact makers so ive dropped magura an email
|
All times are GMT -8. The time now is 05:16 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.