Go Back  RCU Forums > RC Helicopters > RC Helicopter Beginners Forum
JR Ergo 60 Sport Assembly Help >

JR Ergo 60 Sport Assembly Help

Notices
RC Helicopter Beginners Forum If you are a beginner or "newbie" to RC heli's feel free to post your questions right here in the rc heli beginner forum.

JR Ergo 60 Sport Assembly Help

Old 04-18-2020, 08:42 AM
  #1  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Post JR Ergo 60 Sport Assembly Help

Long story short, I'm currently assembling an old JR Ergo 60 Sport gas helicopter that has been in my father's closet since early 2000's. I have the majority of the heli assembled but I'm stuck on one part that seems to contradict the instructions and I'm not sure what I need to adjust.
I'm currently on
7-6 Control Level/Linkage Adjustment. This step stats that I need to have the Elevator and Aileron Servo mixing arms at the same angle as the mixing base arms. As shown in the image attached the whole assembly does not align as the instructions show even though I've followed the instructions to make sure all the linkages are at the correct measurements to the servos. The 7-6 step says I need to adjust the linkage marked (B) in the image to align. I do not see how adjusting this linkage can align the arms since the servo linkages are what control these angles. My guess is the instruction may be incorrect and they meant to say adjust the (A) rods to the servo instead.

I keep trying to upload photos but the forum says I need 10 post before I can post URL's. Can I get this waved so I can post the pictures of what my question is about?

Old 04-20-2020, 12:43 PM
  #2  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Test for 2nd post.
Old 04-20-2020, 12:46 PM
  #3  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

3rd
Old 04-20-2020, 12:46 PM
  #4  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

4th
Old 04-20-2020, 12:46 PM
  #5  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

5th
Old 04-20-2020, 12:46 PM
  #6  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

6th
Old 04-21-2020, 02:20 PM
  #7  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

7th
Old 04-21-2020, 02:20 PM
  #8  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

8th
Old 04-21-2020, 02:20 PM
  #9  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

9th
Old 04-21-2020, 02:20 PM
  #10  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

10th
Old 04-21-2020, 02:22 PM
  #11  
Junior Member
Thread Starter
 
Join Date: Apr 2020
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Now that I got the 10 posts out of the way. Here are the pictures to my original post.


Image of the control level/linkage.

7-6 control level/linkage adjustment from instructions.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Thread Tools
Search this Thread

Contact Us - Manage Preferences Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.