Blade 150S will only yaw in one direction
#1
Junior Member
Thread Starter

Hello guys!
I recently purchased a Blade 150S and I have been losing my mind trying to get it to Yaw/Rudder both Left and Right.
Currently I have used the BT programmer to match the settings from the BNF manual to my DXe (Not RTF version) SPMR1000 Transmitter.
The flight modes and Throttle hold switches are all working as intended and I'm really anxious to get this bird in the air, but I cannot seem to get the darn thing to respond to LEFT Yaw inputs. It happily and eagerly Yaws to the Right despite the throttle level.
I'm at my wits end as my 230S and RS F1 180 neither experience this. Spektrum doesn't provide a Rudder calibration either, it just slows down the tail blade making flying impossible.
Any help here would be immensely helpful.
I recently purchased a Blade 150S and I have been losing my mind trying to get it to Yaw/Rudder both Left and Right.
Currently I have used the BT programmer to match the settings from the BNF manual to my DXe (Not RTF version) SPMR1000 Transmitter.
The flight modes and Throttle hold switches are all working as intended and I'm really anxious to get this bird in the air, but I cannot seem to get the darn thing to respond to LEFT Yaw inputs. It happily and eagerly Yaws to the Right despite the throttle level.
I'm at my wits end as my 230S and RS F1 180 neither experience this. Spektrum doesn't provide a Rudder calibration either, it just slows down the tail blade making flying impossible.
Any help here would be immensely helpful.
#2
Senior Member
My Feedback: (2)
Join Date: Apr 2020
Location: Metro Atlanta GA, USA
Posts: 342
Likes: 0
Received 31 Likes
on
27 Posts

Sorry that I'm not much help, despite owning 3 Blades over the years. If you don't get an answer here, and haven't already tried, you can get some really good help and info here:
Helifreak Blade 150S
Helifreak Blade 150S
The following users liked this post:
Mr Meeseekz (02-08-2023)