Go Back  RCU Forums > RC Helicopters > RC Helicopter Beginners Forum
Reload this Page >

HBK2 and Belt CP questions

Notices
RC Helicopter Beginners Forum If you are a beginner or "newbie" to RC heli's feel free to post your questions right here in the rc heli beginner forum.

HBK2 and Belt CP questions

Old 10-29-2008, 04:07 AM
  #1  
jerrymac
Senior Member
Thread Starter
My Feedback: (2)
 
Join Date: Sep 2008
Location: New Castle, PA
Posts: 576
Likes: 0
Received 0 Likes on 0 Posts
Default HBK2 and Belt CP questions

I am kinda new to the hobby and the forum and was hoping to get a few opinions to help me out. I been practicing on a sim I bought awhile back and recently got a couple real good deals on 2 slightly used helis on eBay. One is a HBK2 and the other a Belt CP. Both were flown once, crashed and given up on. HBK2 needs blades, flybar and a washout assembly. Didn't get the Belt CP yet. After reading a lot of the threads on here I think I will get a brushless motor and esc for the King 2 and I also read that the esc on the Belt CP seems to be inadaquate for the heli. OK, so here are my questions. Would the esc from the Belt CP be ok to use in the King 2 and just add a brushless motor , then get a better esc for the Belt CP? If so, what would be the best motor to get , a 3100kv or a 3900kv and what would be the big difference in the two on the King 2? Also the seller included with the King 2 a new Esky HH gyro. Not sure what comes on the Belt CP, but which heli would benefit the most from adding the HH gyro? Also, what would be a good esc to put in the Belt CP? I bought a new Blackhawk 450 SE from KaPlanes this summer, but it looks so nice sittin on the dining room table that I hate to take it out and crash it , so I figured that I wouldn't feel so bad crashin the less expensive ones for awhile first while I am learning. Any help or suggestions would be appreciated. Since I need to order some repair parts from Ushobbysupply to fix them anyhow ( I like to share the wealth ) I can just go ahead and order a motor and esc too. Thanks for any help. Oh yeah, and the King 2 also came with the 43 tooth belt upgrade in the box, and I only paid $60.00 for all of it. Seemed like a good deal to me anyhow.
Old 10-30-2008, 12:51 PM
  #2  
helicrazedout
Senior Member
 
helicrazedout's Avatar
 
Join Date: Oct 2008
Location: joburg, SOUTH AFRICA
Posts: 383
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HBK2 and Belt CP questions

overall the belt cp is a better heli. it is easy to upgrade compared to the hbk2. i would put the esky hh gyro on the hbk2 and use a logitech 2100 or a futaba 240 on the belt cp. a good esc for the belt cp is a hyperion titan 30a which i personally use and it is great!!! the reason the belt cp is better is it is a 450 size heli compared to the hbk2 which is a 400 size heli this means the frame is bigger and it is more stable to fly. still dont get me wrong the hbk2 is a great heli just not as good as belt cp.
Old 10-31-2008, 10:22 PM
  #3  
Druss
Senior Member
 
Join Date: Aug 2007
Location: Edmonton, AB, CANADA
Posts: 7,441
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HBK2 and Belt CP questions

The king2 is a 300 size heli.

The belt cp is a better heli but does need the esc replaced.

Personally, I'd ask Mike at ushobbysupply as he'd give you the advice you want and he's got good experience with both helis.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.