RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Helicopter Beginners Forum (https://www.rcuniverse.com/forum/rc-helicopter-beginners-forum-165/)
-   -   helli pitches to right (https://www.rcuniverse.com/forum/rc-helicopter-beginners-forum-165/1829583-helli-pitches-right.html)

stevehickey6 05-19-2004 06:19 PM

helli pitches to right
 
everytime i start to get my hell hovering it always pitches to right i have tried moving trimmer from one extream to other but still it pitches to right

can anyone sugest why its doing this and also a cure

i have the esky honey bee

thanks
steve

scott36 05-19-2004 07:11 PM

RE: helli pitches to right
 
take the servo arms off and center the servos and then put the arms back on and make sure every thing is level on the head and then trim the heli from there ..

stevehickey6 05-19-2004 07:35 PM

RE: helli pitches to right
 
hi scott thanks for your reply ill try that tommorow
once again thanks for your help

arceye 05-20-2004 10:16 AM

RE: helli pitches to right
 
By pitching to the right do you mean leaning to the right while hovering or actually moving to the right ? as leaning to the right is a normal characteristic of a right rotating heli

stevehickey6 05-20-2004 11:05 AM

RE: helli pitches to right
 
hi thanks for your reply just as helli starts to take of it always goes to right leans over

elmote 05-23-2004 11:50 PM

RE: helli pitches to right
 
Normal on every CW rotat helo ever born. You must compensate for it as you take off. After the bird is up and settled into a hover, you can trim for drift etc. But that move as it leaves the groud is normal

Elmo Te

Spaceman Spiff 05-24-2004 01:02 AM

RE: helli pitches to right
 
yup, it is possible you have a set up problem too, but it is important to know the heli needs to lean to teh left a bit to hold a hover. (compensating for tail rotor thrust)


All times are GMT -8. The time now is 12:31 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.