Aerohawk Technical!
 

Hi,

Looking for abit of technical info pls.

Got a second hand Aerohawk with no info really.
Got it going and figured out main bit & pieces.

Don't know what the pots on the main pcb are for although one must be to adj tail motor speed - what's the other for?
Also what are the dip switches on Tx?

Cheers in Advance.

RE: Aerohawk Technical!
 

Looking at the 3in1 mixer board


The pot on the left (nearest the vertical rectangular 'box' - this is the gyro) is the gyro sensitivity
The other pot is the Tail motor mixer


be careful when adjusting these - apparnetly you can fore them past their end-stops and can damage them

RE: Aerohawk Technical!
 

Thnx

I think previous owner didn't have much success in getting it to fly as set-up is all over the place, both pots turned up full etc!

Cheers