Main blade question....
 

I nicked the very corner tip of one of my blades. It's not major but i'm not sure if the blades will work properly if they are not exactly the same. If i put the two together and make them identical will i be ok?

Thanks for the help.

RE: Main blade question....
 

If you have a micro I wouldn't worry about it, I have a HB2 and I've put some nice "nicks" in the blades and I can't tell the diff. =) If it's a bigger heli than I don't know... I'd just try it, but I have little reguard for human life.. :D

RE: Main blade question....
 

Ive done the same thing with my stock blades. Here is a good replacement set that are almost identical, but a little bit better.

[link]http://www.helihobby.com/[/link]

CNE228 Elite Fully Symmetrical Wood Blades

http://www.helihobby.com/commonImage..._FP/CNE228.jpg

PART#CNE228