Dual Conversion TX to Single Conversion RX
 

Will a dual conversion transmitter work with a single conversion receiver?
Thanks,
Keven

RE: Dual Conversion TX to Single Conversion RX
 

Single/dual conversion only applies to recievers and how they process the signal there is no such thing as a dual conversion transmitter.

If you have your choice between recievers, dual conversion is the better of the 2.

RE: Dual Conversion TX to Single Conversion RX
 

Your transmitter will work with both. But Barracuda is right. Dual is better.

RE: Dual Conversion TX to Single Conversion RX
 

The only TX/RX compatibility issue is modulation type... there's negative shift PPM, positive shift PPM, and PCM. In general, JR and Airtronics are positive shift PPM, Futaba and Hitec are negative shift PPM, and PCM is proprietary, so you need to stick within same brand for that. Some later model RXs and TXs can do both positive and negative shift PPM.

RE: Dual Conversion TX to Single Conversion RX
 

Ok, thanks.
Keven