will a fbl-3axis control work on a flybar heli
#1
Junior Member
Thread Starter
Join Date: Feb 2020
Location: sandy hook, ky.
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
will a fbl-3axis control work on a flybar heli
running an old telebee hh700 gyro and it just wont do the trick on the tail like we all want..cant really do a reversed tail flyby without a lot of consintration to keep the tail straight..been looking at 3 different flybarless controls /w gyro..looking at futaba, specktrum and kds v2.. one of these will go on my Schluter scout 60 II.os 61 fsh and dx6i....
question---am I just asking for trouble. or are they going to turn my heli into the rock-solid flyer that I see all these electric guys hover and fly backwards...thx in advance, gary.
she may be old but us oldtimers keep going and going and going...LOL
question---am I just asking for trouble. or are they going to turn my heli into the rock-solid flyer that I see all these electric guys hover and fly backwards...thx in advance, gary.
she may be old but us oldtimers keep going and going and going...LOL
#2
You can probably use a fbl controller on flybar heli, as long as you don't connect the cyclic servos to it. Only use it for the rudder channel. The only reason I would see doing this is if you planned on possibly going FLB on that heli in the future. If you are staying with a flybar you would be better served with a Spartan Quark or a GY401 with correctly matched digital tail servo. I have the Quark on my Raptor 50 nitro heli, and the GY401 on a Trex 450 and the tails hold rock solid doing backwards flying, funnels, etc.