Weird blade sound
#1
Senior Member
Thread Starter
Join Date: Nov 2009
Location: Glendale,
AZ
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
Weird blade sound
Blade 400 / 3D blades
Has anyone ever used 3D CF blades. I was doing some maneuvers today and when I switched the switch to 3D, it had a sound like it was hitting tin. Or maybe it sounded like an overspeed. I have never heard that before and these blades are new. Has anyone else ever experienced something like this?
Has anyone ever used 3D CF blades. I was doing some maneuvers today and when I switched the switch to 3D, it had a sound like it was hitting tin. Or maybe it sounded like an overspeed. I have never heard that before and these blades are new. Has anyone else ever experienced something like this?
#3
Senior Member
Thread Starter
Join Date: Nov 2009
Location: Glendale,
AZ
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
RE: Weird blade sound
ORIGINAL: rotordoc1
What 3D C/F blades??? They all are different, so sound different, even if they are made from C/F.
What 3D C/F blades??? They all are different, so sound different, even if they are made from C/F.
http://cgi.ebay.com/2X-325mm-carbon-...#ht_2431wt_957
#4
Senior Member
RE: Weird blade sound
I don't know what could be causing your issue? Maybe some delamination somehwere. There have been a number of threads, in various heli forums, about various QC issues with some of these blades.
#5
Senior Member
Thread Starter
Join Date: Nov 2009
Location: Glendale,
AZ
Posts: 1,034
Likes: 0
Received 0 Likes
on
0 Posts
RE: Weird blade sound
At another forum, they all seem to be agreeing that it is the balancing tape that is making the noise. I switched some blades around to where I don't need any tape and will try it again.