RCU Forums - align gyro micro switch problem

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Helicopter General Discussions (https://www.rcuniverse.com/forum/rc-helicopter-general-discussions-129/)

- - align gyro micro switch problem (https://www.rcuniverse.com/forum/rc-helicopter-general-discussions-129/7896449-align-gyro-micro-switch-problem.html)

noginblue

08-28-2008 05:31 PM

align gyro micro switch problem

i have an align rce 600 and need to change the servo to digital signal but the micro switch will not budge, what do people use to move them , there so small and fragile

Druss

08-30-2008 11:37 PM

RE: align gyro micro switch problem

maybe it's a little stuck?? try a tiny bit of oil?

dooleyje

08-31-2008 07:32 AM

RE: align gyro micro switch problem

Quote:

ORIGINAL: Druss

maybe it's a little stuck?? try a tiny bit of oil?

NO NO NO OIL the switch is tight for a reason. There are electronic components in there and a drop of oil would ruin it. Use a small jewelers screwdriver or small drill bit to flip it.

Jim

Druss

08-31-2008 10:27 PM

RE: align gyro micro switch problem

nah, I've done it before but like i said, a "tiny" bit added with a tooth pick. I'm assuming he already tried a small screwdriver because that switch is so small you can't really do it with a finger.

All times are GMT -8. The time now is 01:38 PM.