Problem wit tail input!!!
 

Im not getting any response from rudder!!! Please help, the gyro is holding somewhat, its got a drift to the right, but any input i give the rudder is unresponsive, it wont let me make any corrections so i have to sit it back down. Its really frustrating. Please help an thank you!!

RE: Problem wit tail input!!!
 

Very strange. You could try unplugging the gyro and plug the tail servo directly into the rudder channel on the RX, then move the rudder stick with the heli on the bench and see if the servo is working properly. If it does then the gyro might be the problem.

RE: Problem wit tail input!!!
 

Ya i still cant find out why, i dont really wanna go buy a gyro till i know for sure thats it, when i hold the heli an ive it left rudder it pulls hard, if i give it right it takes a second, an it doesnt have alot of power turning right. But when i try to fly it its like there is no rudder at all, about a week ago it only had a slight right drift (rudder turning right). You think that might be the gyro?

RE: Problem wit tail input!!!
 

Hi Deathproofheli,
I think you have swapped the gain channel with the rudder input channel. Swap those two connectors and try again.